Alarm Controls TRENDnet Seco-Larm MG Electronics Vitek Altronix Transmission
Founded in 1971, Alarm Controls offers a complete line of affordable access control products and accessories to secure and control commercial door openings at an exceptional value. Whether you need maglocks, push buttons, push plates, key switches, keypads, exit devices, electric strikes, wall plates, a power supply, or monitoring and control stations, they have what you need. Their robust push button and push plate product lines provide a wide variety of text, finishes, engravings, fills, and sizes for every application, including pneumatic options.
-
Seco-Larm SK-919TP1H-BQ 1 Button, 1 Channel Handheld Slimline RF Transmitter
- Extreme Durability
- Magic LED only appears when buttons are pressed
- Frequency 315MHz (433.92MHz available by special order)
- Compatible with all 315MHz SECO-LARM receivers
- Over 68 billion (6.8x1010) possible codes
-
Altronix eBridge1ST EoC Single Port Small Transceiver, 25Mbps, Requires Compatible Receiver
- Retrofit digital IP cameras in an analog CCTV installation
- Works with IP Megapixel and non-Megapixel cameras
- Extend Network link distance in an industrial environment over 610m
- Upgrade deployed CCTV Coax to a digital network in Retail, Casinos, Airports, Schools, Hospitals, etc.
-
Seco-Larm VC-3YAQ 4-in-1 HD to HDMI Converter
- Wall mountable with included screws
- Picture-in-picture mode when dual HD Analog video input used
- HDMI/VGA output support: 480p, 576p, 720p, 1080i, 1080p
- CVBS output support: NTSC, PAL
- CVBS under scan adjustment
-
Vitek VTA-D108 8 Output Video Distributor
- 1 input with 8 Balanced 75 ohm 1 volt P/P outputs
- Ground Loop Isolation
- Auto terminating BNC connections
- Small Compact Size
- 12 VDC Power Input (Transformer Included)
-
Seco-Larm MVA-TH01Q Composite-to-HDMI Converter with Scaler
- Converts composite video and stereo audio to 720p or 1080p HDMI
- Supports NTSC, PAL, and SECAM video inputs
- Supports up to 1080p on HDMI output
- Stereo audio input
- Selectable between 720p and 1080p upscaling
-
Seco-Larm MVE-AH1E1-01NQ HDMI Extender Over Single Cat5e/6
- Extend HDMI over a single Cat5e/6 cable
- Supports resolutions from 480i to 1080p with zero signal loss
- Transmits up to 164ft (50m) at 1080p over Cat5e/6 cable
- HDMI Loop output for local HDMI display
- Plug and play operation – comes as a complete set
-
Altronix EBRIDGE16PCRX EoC 16 Port Receiver, 25Mbps per port, 1U Requires Compatible Transceiver
- Input: 48VDC to 56VDC UL Listed power supply
- Ethernet Connectivity: sixteen (16) RJ45, auto-crossover
- Ethernet Wire type: 4-pair Cat-5 or better structured cable
- Ethernet Distance: up to 100m
- Ethernet Speed: 10/100BaseT, half/full duplex, auto negotiation
-
Altronix NETWAYSP8PL 8 Port PoE+ Switch
- Two (2) Gigabit SFP ports
- Two (2) 10/100/1000 Mbps ports
- Six (6) 10/100 Mbps ports
- IEEE 802.3at (30W), IEEE 802.3af (15W) compliant, or Hi-PoE (60W)
- PoE activity LED indicators
-
TRENDnet TFC-1000S40D5 Intelligent 1000Base-T to 1000Base-LX Dual Wavelength Single Mode SC Fiber
- Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX standards
- 1 x 1000Base-T RJ-45 port
- 1 x 1000Base-LX single-mode bi-directional simplex-SC type fiber port
- Provides Dip switch to set: Fiber (Forced / Auto-Negotiation), LLR (Enable / Disable)
- Support LLCF (Link Loss Carry Forward, Link Pass Through)
