Alarm Controls ICRealtime Nitek MG Electronics Comnet Tripp Lite Transmission
Founded in 1971, Alarm Controls offers a complete line of affordable access control products and accessories to secure and control commercial door openings at an exceptional value. Whether you need maglocks, push buttons, push plates, key switches, keypads, exit devices, electric strikes, wall plates, a power supply, or monitoring and control stations, they have what you need. Their robust push button and push plate product lines provide a wide variety of text, finishes, engravings, fills, and sizes for every application, including pneumatic options.
-
Comnet CNFE1002M1A 10/100 Mbps Standard Mount DC-Only Media Converter
- 10/100 BASE-T/TX electrical port
- 100 BASE-FX optical port
- Electrical port supports Auto-Negotiation for 10/100 Mbps, full/half duplex data
- Optical port supports 100 Mbps full duplex data
- Automatic MDI/MDI-X crossover
-
Comnet CNFE1005POES/M 10/100 Mbps Ethernet 2 Port Media Converter with PoE+
- Exceeds the requirements of the latest PoE+ standard (IEEE 802.3at)
- The Ethernet electrical interface auto-negotiates to either 10 or 100 Mbps without the need for any user selection
- The optical interface operates at 100 Mbps (100-FX)
- Power Sourcing Equipment (PSE): Provides 30 watts in two modes at 48 VDC, for high output demand applications of remote Ethernet equipment
- ST optical connector
-
Comnet SFP-46 1000FX 1310nm, 2km, 2 Fiber, LC, MSA Compliant
- Interchangeable SFP for fiber type, distance and connector
- IEEE 802.3 compliant
- Conforms to (SFP) Small Form-Factor Pluggable Multi-Source Agreement (MSA)
- Operating temperature: -40Ëš C to +75Ëš C
- Storage temperature: -40Ëš C to +85Ëš C
-
Comnet CLLFE16POEU Local 16 Channel Ethernet-over-UTP Extender With 30W PSE PoE+
- Transmits individual Ethernet data channels with PoE+ Power Injection or Pass-through PoE+ over standard UTP
- Extends Ethernet up to 3,000 feet (914 m) at 10 Mbps or 2,000 feet (610 m) at 100 Mbps over UTP cable
- Extended temperature operation from -40°C to +75°C
- Extended Pass-through PoE meets the IEEE 802.3at standard for Power over Ethernet
- Full 10/100 Mbps Bandwidth
-
Comnet CLLFE4POEC Local 4 Channel Ethernet-over-COAX Extender With 30W PSE PoE+
- Transmits individual Ethernet data channels with PoE+ Power Injection or Pass-through PoE+ over Coaxial cable
- Extends Ethernet up to 5,000 feet (1,524 m) at 10 Mbps or 2,000 feet (610 m) at 100 Mbps over Coaxial cable
- Extended temperature operation from -40°C to +75°C
- Extended Pass-through PoE meets the IEEE 802.3at standard for Power over Ethernet
- Full 10/100 Mbps Bandwidth
-
Comnet FDC8NLRS1 8-Channel Contact Closure Non-Latching Receiver
- Transmits up to eight contact closures over one optical fiber
- Eight channel Point-to-Point architecture
- Optically isolated inputs rated at 1500 V to ground
- Status indicating LEDs provide rapid indication of critical operating parameters
- Hot-swappable rack modules
-
Comnet CNFE2002M1A Standard Mount 10/100 Mbps DC-Only Media Converter
- 10/100 Mbps Ethernet
- 2 × 10/100 BASE-T/TX electrical ports
- 100 BASE-FX optical port
- Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data
- Optical port supports 100 Mbps full duplex data
-
Comnet CNFE2002M1B Standard Mount 10/100 Mbps DC-Only Media Converter
- 10/100 Mbps Ethernet
- 2 × 10/100 BASE-T/TX electrical ports
- 100 BASE-FX optical port
- Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data
- Optical port supports 100 Mbps full duplex data
-
Comnet CNFE1002S1A 10/100 Mbps Standard Mount DC-Only Media Converter
- 10/100 BASE-T/TX electrical port
- 100 BASE-FX optical port
- Electrical port supports Auto-Negotiation for 10/100 Mbps, full/half duplex data
- Optical port supports 100 Mbps full duplex data
- Automatic MDI/MDI-X crossover
