Alarm Controls COP-USA NVT Avycon Seco-Larm Transmission
Founded in 1971, Alarm Controls offers a complete line of affordable access control products and accessories to secure and control commercial door openings at an exceptional value. Whether you need maglocks, push buttons, push plates, key switches, keypads, exit devices, electric strikes, wall plates, a power supply, or monitoring and control stations, they have what you need. Their robust push button and push plate product lines provide a wide variety of text, finishes, engravings, fills, and sizes for every application, including pneumatic options.
-
Seco-Larm MVE-AH1E1-01NQ HDMI Extender Over Single Cat5e/6
- Extend HDMI over a single Cat5e/6 cable
- Supports resolutions from 480i to 1080p with zero signal loss
- Transmits up to 164ft (50m) at 1080p over Cat5e/6 cable
- HDMI Loop output for local HDMI display
- Plug and play operation – comes as a complete set
-
NVT NV-216A-PV PVD Power Supply Passive Receiver
- Power-Video (PV) signals are routed via UTP and RJ45
- Use with NVT’s PVDTM
- Power Supply Hubs and Cable Integrators, or with a second NV-216A-PV
- Frequency response DC to 10MHz (see Resolution Distance Chart)
- Exceptional interference rejection
-
Seco-Larm SK-939T2-GNUQ 2 Button, 3 Channel 433.92MHz Pendant RF Transmitter
- Over 68 billion possible codes
- LED transmission indicator only appears when buttons are pressed
- Operates up to 500ft (150m)
- RF Anti-scan protection
- FCC and IC Certified
-
NVT NV-CLR-024-1000 CLEER 24 Port Managed Switch
- Accelerating your return on investment by reducing infrastructure costs
- Collapsing planning and deployment time
- Eliminating infrastructure barriers, risks, disruption and costs
- Creating a robust IP platform that is easy to configure, deploy and manage
-
Seco-Larm SK-910RB2-4Q 2 Channel RF Receiver, 433.92MHz, Two Relays
- Five programmable relay output modes
- 11~24 VAC/VDC Operation
- Range: Up to 500ft (150m)
- Controls garage doors, gates, house lights, alarm panels or other devices via remote
- LED indicates RF reception, learn mode entered, transmitter learned, memory cleared, and relay output mode
- Five programmable relay output modes
-
Seco-Larm SK-919T4-GNQ 4 Button RF Transmitter for use with all SECO-LARM 315 MHz Receivers, Pre-coded
- 4 Buttons, 15 channels
- Over 68 billion possible codes
- LED Transmission indicator
- Patent pending
-
Seco-Larm SK-919T1-GBQ 1 Button RF Transmitter for use with all SECO-LARM 315 MHz Receivers, Pre-coded
- 1 Button, 1 channel
- Over 68 billion possible codes
- LED Transmission indicator
- Patent pending
-
NVT NV-EC1701-K4H Ethernet/PoE to Coax Kit
- Transmit 10/100 BaseT full duplex Ethernet up to 8,000ft (2,500m) or more over RG-59/U
- Transparently supports all networking protocols (UDP, TCP/IP, HTTP, Multicast with IGMP, etc.)
- Advanced 128-bit AES encrypted transmission and power technology
- Built-in transient protection; Industrial temperature range
-
NVT NV-16PS13-PVD Power Supply Passive Video Receiver Hub
- Standard telecom/datacom structured cabling pinouts per EIA/TIA 568B
- Independently selectable 24VAC-OFF-28VAC with 1 Amp per channel
- Automatic-reset fault protection; transient protection
- Individually floating outputs ensure total ground-loop immunity
- Diagnostic LEDs show load/no load, miswires, and overload conditions
