Alarm Controls COP-USA InVid Mobotix Honeywell ZKAccess Transmission
Founded in 1971, Alarm Controls offers a complete line of affordable access control products and accessories to secure and control commercial door openings at an exceptional value. Whether you need maglocks, push buttons, push plates, key switches, keypads, exit devices, electric strikes, wall plates, a power supply, or monitoring and control stations, they have what you need. Their robust push button and push plate product lines provide a wide variety of text, finishes, engravings, fills, and sizes for every application, including pneumatic options.
-
Mobotix Mx-A-ETP1A-2601-SET Media Converter Set Ethernet (PoE+) Two-wire Line
- Mx-ETP1A-2601-SET Complete set consisting of transmitter (Tx) and receiver (Rx) for implementing an Ethernet transmission link via two-wire line
- Transmission of Ethernet and PoE+ power supply via two-wire line according to IEEE1901
- Simple connection of 10/100 Mbit Ethernet end devices
- Max. 95 Mbps transmission bandwidth
- Range up to 600m for data / 300m for PoE (depending on the quality of the two-wire line)
-
InVid INVID-IPOVERCOAX IP Over Coax Passive Converters
- Ethernet & Power transmission over Coaxial cable
- No power adapter is required
- Up to 2,000ft
- Compact design (79mm×52mm×23mm)
- Interface: 1*RJ45 10/100Mbps, 1*BNC RG59 coaxial
-
InVid IA-HDBAL1 HD-TVI Video Balun
- HD-TVI balun for 1080p/720p
- Enable megapixel video more than 500 feet over a single unshielded twisted pair of wires from a Cat5e cable
-
InVid IA-1632HD HD-Video Splitter 16 Input to 32 Output Video Distributor
- HD-Video splitter 16 input to 32 output video distributor
- supports HD-TVI, AHD, HDCVI, 960H, NTSC, PAL Video Signal
-
InVid ULT-ENCODER4 4 Channel Video & 4 Channel Audio Input
- 4 channel video & 4 channel audio input
- WD1: 25 fps/ch
- 1 PoE ethernet interface
- Alarm I/O: 4/1, microSD
- Compact design
-
InVid IA-816HD Video Splitter
- Dual Power: DC12V / AC24V
- Connected to Video Camera, Multiplexer, DVR, VCR & More
- AC24V Power supply included
-
Mobotix Mx-A-TCLIENTA MxThinClient IP Video Interface for Live Camera Display
- Live display of one or several MOBOTIX cameras or images of a connected web server on a monitor/TV, either permanently or in a controlled looping sequence
- Display of the camera with the most recent event, for example motion detection
- Boot-stable with reliable AutoStart after power failure
- Display of the missing camera connection on screen
-
InVid PAR-ENCODER1 1 Channel Encoder
- Single Channel encoder
- Supports up to 4MP AHD, 2MP TVI/AHD/CVI and CVBS Signals
- H.265/H.264/MJPEG Compression
- Video Loop-Out - CVBS (to monitor or DVR)/HD Analog (DVR)
- Up the Cable (UTC) Control - For PTZs
-
InVid IA-16BALUNHUB 16 Position BNC to RJ45 Female with Power Pigtails
- 16 position BNC to RJ45 female with power pigtails
