Alarm Controls COP-USA InVid ETS Weldex Panasonic Transmission
Founded in 1971, Alarm Controls offers a complete line of affordable access control products and accessories to secure and control commercial door openings at an exceptional value. Whether you need maglocks, push buttons, push plates, key switches, keypads, exit devices, electric strikes, wall plates, a power supply, or monitoring and control stations, they have what you need. Their robust push button and push plate product lines provide a wide variety of text, finishes, engravings, fills, and sizes for every application, including pneumatic options.
-
InVid INVID-IPOVERCOAX IP Over Coax Passive Converters
- Ethernet & Power transmission over Coaxial cable
- No power adapter is required
- Up to 2,000ft
- Compact design (79mm×52mm×23mm)
- Interface: 1*RJ45 10/100Mbps, 1*BNC RG59 coaxial
-
InVid IA-HDBAL1 HD-TVI Video Balun
- HD-TVI balun for 1080p/720p
- Enable megapixel video more than 500 feet over a single unshielded twisted pair of wires from a Cat5e cable
-
Panasonic RR404C 4 Channel FM Video Rack Card Receiver - Multimode
- Compatible with NTSC; RS-170A & RS-343A and PAL
- Diagnostics Video, Power and Optical Presence
- Full Color Transmission
- Real Time Video Transmission
- PFM Transmission
-
Panasonic VP-8-V2 8 Channel Encoder
- Connectable to HD-TVI and analog cameras
- Connectable to the coax camera/dome with long transmission distance
- Manual video quality diagnostics
- VCA detection alarm (line crossing detection and intrusion detection)
- 1 self-adaptive 10M/100M/1000M network interface
-
Panasonic PA-VP-4 4 Channel Encoder
- 4 channel
- All channels D1 resolution, H.264 at 30FPS
- Dual Stream
- 4 video loop-outs
- Encoder-based motion detection
-
Panasonic WJ-PR204 4 Channel Coaxial - LAN Converter, Receiver Side
- 4-channel Receiver side Unit
- 4 network cameras can be connected and used on a single receiver side unit
- Power over Ethernet Plus (PoE+) ready The coaxial - LAN converter is compliant with PoE+ standards (IEEE802.3at) and PoE+ cameras can be connected and used
- High-speed transmission The coaxial - LAN converter is capable of transmission speeds of 35 Mbps or over for TCP*2, and 45 Mbps or over for UDP connections.(When used with RG-6/U coaxial cable, and for distances under 2.0 km (6,560 feet) [PR201], 500 m (1,640 feet) [PR204]
- No setup required
-
Panasonic MTM1605P Fiber Transmitter, Video/Pana UTC, Multimode, Module (V-UTC)
- Video with reverse Panasonic camera and PTZ control over one multimode optical fiber
- Compatible with NTSC; RS-170A & RS-343A and PAL video signals
- Diagnostics: Video, power and optical presence with optical AGC
- Full color and PFM video transmission
-
InVid IA-1632HD HD-Video Splitter 16 Input to 32 Output Video Distributor
- HD-Video splitter 16 input to 32 output video distributor
- supports HD-TVI, AHD, HDCVI, 960H, NTSC, PAL Video Signal
-
InVid ULT-ENCODER4 4 Channel Video & 4 Channel Audio Input
- 4 channel video & 4 channel audio input
- WD1: 25 fps/ch
- 1 PoE ethernet interface
- Alarm I/O: 4/1, microSD
- Compact design
