AG Neovo Ganz Seco-Larm Ditek Mobotix Transmission
AG Neovo is a world-leader in display devices for both professional and consumer markets.. Designed for a wide range of conditions AG Neovo delivers products that blend in with their environment allowing their use in a wide range of locations. This intense focus on design has set their equipment apart from the competition and allowing their systems to perform where others would fail. Recently, two of AG Neovo's devices were recipients of the prestigious iF award for product design.
Founded in 1999, AG Neovo is headquartered in Taiwan and has offices throughout Europe, Asia and North America. Its success is based not only of their technology but their approach and by listening to the requirements and concerns of the industry AG Neovo is redefining the traditional monitor by delivering new and innovative products to the world stage.
For warranty information click here: http://us.agneovo.com/us/content/warranties.asp
-
Seco-Larm SK-919TP1H-BQ 1 Button, 1 Channel Handheld Slimline RF Transmitter
- Extreme Durability
- Magic LED only appears when buttons are pressed
- Frequency 315MHz (433.92MHz available by special order)
- Compatible with all 315MHz SECO-LARM receivers
- Over 68 billion (6.8x1010) possible codes
-
Seco-Larm VC-3YAQ 4-in-1 HD to HDMI Converter
- Wall mountable with included screws
- Picture-in-picture mode when dual HD Analog video input used
- HDMI/VGA output support: 480p, 576p, 720p, 1080i, 1080p
- CVBS output support: NTSC, PAL
- CVBS under scan adjustment
-
Seco-Larm MVA-TH01Q Composite-to-HDMI Converter with Scaler
- Converts composite video and stereo audio to 720p or 1080p HDMI
- Supports NTSC, PAL, and SECAM video inputs
- Supports up to 1080p on HDMI output
- Stereo audio input
- Selectable between 720p and 1080p upscaling
-
Seco-Larm MVE-AH1E1-01NQ HDMI Extender Over Single Cat5e/6
- Extend HDMI over a single Cat5e/6 cable
- Supports resolutions from 480i to 1080p with zero signal loss
- Transmits up to 164ft (50m) at 1080p over Cat5e/6 cable
- HDMI Loop output for local HDMI display
- Plug and play operation – comes as a complete set
-
Mobotix Mx-A-ETP1A-2601-SET Media Converter Set Ethernet (PoE+) Two-wire Line
- Mx-ETP1A-2601-SET Complete set consisting of transmitter (Tx) and receiver (Rx) for implementing an Ethernet transmission link via two-wire line
- Transmission of Ethernet and PoE+ power supply via two-wire line according to IEEE1901
- Simple connection of 10/100 Mbit Ethernet end devices
- Max. 95 Mbps transmission bandwidth
- Range up to 600m for data / 300m for PoE (depending on the quality of the two-wire line)
-
Seco-Larm MVE-AH1T1-01YQ HDMI Extender Over Two Wires
- Extends HDMI over two wires
- Supports resolutions from 480i to 1080p with zero signal loss
- Transmits up to 984ft (300m) at 1080p over two wires
- Plug and play operation – comes as a complete set
- HDMI Loop output for local HDMI display
-
Seco-Larm MVA-HT01Q HDMI to Composite Converter
- Converts HDMI to composite video + stereo audio
- Supports input resolutions up to 1920x1080
- Supports NTSC or PAL output
- Stereo analog audio output
- Plug and play operation
-
Seco-Larm SK-910RB2Q 2-Channel Receiver Five Programmable Output Modes 315MHz
- Flexible operating voltage: 11~24 VAC/VDC
- Up to 500ft (152m) range
- Independently programmable channels
- Controls garage doors, gates, house lights, alarm panels or other devices via remote
- Compatible with all 315MHz SECO-LARM transmitters (fixed code and CODEBUMP)
-
Seco-Larm SK-910RBQ 1-Channel RF Receiver 315MHz
- Flexible operating voltage: 11~24 VAC/VDC
- Up to 500ft (152m) range
- Controls garage doors, gates, house lights, alarm panels or other devices via remote
- Compatible with all 315MHz SECO-LARM transmitters (fixed code and CODEBUMP)
- One-button programming, no need to cut jumpers
