Interlogix 60-460-319-5-LB Crystal 135 degree Rate-Of-Rise Heat Sensor w/ Lithium Battery

SKU
60-460-319.5-LB
Rating:
80% of 100
Model No
60-460-319.5-LB
$76.43
Product Highlights
    • UL listed for highest standards of performance and reliability
    • Wireless design communicates with all learn-mode panels
    • Ideal for environments with high dust or likelihood of rapid fire development
    • 15°F (9°C)/min rate-of-rise rating
    • 135°F/194°F UL temp. rating

The 60-460-319-5-LB is a 135° crystal rate of rise heat sensor with a lithium battery from Interlogix that is designed to promote high operation in areas where heat may be normally found including attics and kitchens. The 60-460-319-5-LB heat sensor comes with a supervisory report every 64 minutes, a wall/ceiling mounting design, a 135°F fixed temperature sensor activation, as well as a 15°F per minute temperature rise activation. The 60-460-319-5-LB heat sensor also features a 2500ft detection range, and is able to promote high operation in detecting rapidly rising temperatures in areas that may pose more of a fire risk. ITI Rate-of-Rise and Fixed Temperature Heat Detectors offer an effective fire safety solution for environments with high likelihood of rapid fire development, or where optical smoke detectors cannot be used due to high dust conditions. These detectors are designed to monitor the room temperature and activate the alarm if the temperature gets too high or increases rapidly. With rate-of-rise heat detectors, a temperature increase at the sensor of 15°F (9°C) or more per minute activates the rate-of-rise feature. This closes the contacts in the sensor to transmit the alarm condition to the alarm control panel. When the rate-of-rise element alone has been activated, the sensor is self-restoring. With combination rate-of-rise and fixed temperature detectors, the fixed temperature element is activated when the temperature of the center disk rises to the sensor’s rated temperature. This closes contacts in the sensor and transmits an alarm condition to the fire alarm control panel. The fixed temperature element is non-restorable and, when activated, the detector must be replaced. The need for replacement is indicated when the center disk has popped away from the detector. When selecting the location on the ceiling for the heat sensor, do not locate it in direct path of hot or cold airflow. Refer to the detector specifications for the recommended maximum spacing. Earlier detector response may be obtained by reducing the spacing between detectors.

Features

      • UL listed for highest standards of performance and reliability
      • Wireless design communicates with all learn-mode panels
      • Ideal for environments with high dust or likelihood of rapid fire development
      • 15°F (9°C)/min rate-of-rise rating
      • 135°F/194°F UL temp. rating
      • 100°F/150°F UL max. ambient ceiling temp. rating
      • Provides detection for up to 2500 sq. ft.
      • Easy installation
SKU  60-460-319.5-LB
Manufacturer  Interlogix
Type  Wireless
Scene  Indoor
There are no related videos.

4

1 reviews

Write a review

Share your thoughts with other customers

Top customer reviews

  1. Walter J.

    Verified Buyer

    Not quite what I expected 0 people found this helpful

    I purchased two of these units one for the kitchen and one for the garage. The unit in the kitchen is operational but I cannot use the other one for the garage. The units are restricted but the ambient temperature of it's surroundings. My garage will sometimes get over 100 degrees Fahrenheit and these units do not work properly at that ambient temperature. I've asked to exchange it (paying the difference)for the 150 degree unit but I haven't heard back from the distributor. It's been several weeks now.
    Was this review helpful?
Write Your Own Review
You're reviewing:Interlogix 60-460-319-5-LB Crystal 135 degree Rate-Of-Rise Heat Sensor w/ Lithium Battery
Your Rating
Downloads & Manuals
SKU
60-460-319.5-LB
Availability: Out of stock