- Complete Systems
-
Security Cameras
-
Recording
- Monitors
- Network
- Transmission
- Security
- Audio
- Accessories
- Power
- Complete Systems
-
Security Cameras
-
Recording
- Monitors
- Network
- Transmission
- Security
- Audio
- Accessories
- Power
- Home
- Panavise Miscellaneous- Proprietary Accessories
Product was successfully added to your shopping cart.- Perfect for external corners of wall joints or strapped to pipes at least 1.25" (31.8mm) in diameter (straps not included). Face is 0.75" (19.1mm) wide; height is 2.875" (73.0mm)
- Corner Clamp slots accept max. strap width: 0.75" (19mm); holes dia. 0.2" (5mm)
- 1/4-20 mounting stud
Availability: Usually ships the next business day- Quality manufactured and fully adjustable: 210° Tilt, 360° Turn & 360° Rotation
- Knob and tamper-resistant set-screw adjusting options included
- Overall knuckle height approximately 2.5" (63.5mm)
- 1/4-20 mounting stud with lockring
Availability: Usually ships within 3-5 business days- 16" (406.4mm) overall mount length (including shaft and ends)
- Double wound shaft will not droop or require safety wires
- Shaft is covered with durable black vinyl
- Full range of motion at the camera: 210° Tilt, 360° Turn & 360° Rotation
- 1/4-20 mounting stud with lockring
Availability: Usually ships within 3-5 business days- 9" (228.6mm) overall mount length
- Includes two mounting bases that screw easily into the machined aluminum alloy shaft [0.875" (22.2mm) in diameter]
- Full range of motion at the camera: 210° Tilt, 360° Turn & 360° Rotation
- Knob and tamper-resistant set-screw adjusting options included
Availability: Usually ships within 3-5 business days- Compatible with all 727 series Pedestal Mounts
- Replacement steel shafts allow an installer to quickly change the rise height of a pedestal mount to 6" (152.4mm), 9" (228.6mm) or 12" (304.8mm)
- Interchangeable Shafts
Availability: Usually ships within 3-5 business days- Perfect for external corners of wall joints or strapped to pipes at least 1.25" (31.8mm) in diameter (straps not included). Face is 0.75" (19.1mm) wide; height is 2.875" (73.0mm)
- Corner Clamp slots accept max. strap width: 0.75" (19mm); holes dia. 0.2" (5mm)
- 1/4-20 mounting stud
Availability: Usually ships within 3-5 business days- Heavy duty, steel construction
- Includes three adjusting knuckles (1/4-20 studs with lockrings)v
- Fully adjustable at the cameras (210° Tilt, 360° Turn & 360° Rotation)
- Distance from wall to center of cross bar is 6.25" (158.8mm)
- Height of adjusting knuckles is approx. 2.75" (69.8mm)
Availability: Usually ships within 3-5 business days- Includes PanaVise T-Button Tipper with Adjustment Wheel adapts to AMPS adapter plate
- Attaches easily to any AMPS compatible mount using the included hardware
- Rubberized indexed grippers and foam backed cradle won’t scratch your device
- Quick release button for easy phone access
- Vertical low profile grips allow full access to touch screens
Availability: Usually ships within 3-5 business days- Accurately controls where the ram will stop its motion
- Quickly and easily slips over ram
- Easy-to-use coarse adjustment firmly locks the Posi-Stop in place
- Fine precision adjustment stops the ram exactly where you want it
Availability: Usually ships within 3-5 business days- 9" (228.6mm) overall mount length
- Both adjusting points have a full range of motion: 210° Tilt, 360° Turn & 360° Rotation
- 1/4-20 mounting stud with lockring
- Shafts are machined aluminum alloy 0.875" (22.2mm) in diameter
- Knob and tamper-resistant set-screw adjusting options included
Availability: Usually ships within 3-5 business days- 0.5" (12.7mm) diameter solid steel shaft
- Length of mount from base to front of mount: 4.0" (102mm)
- Length of mount from bottom of angle to top of mount: 3.375" (85.7mm)
- 1/4-20 stud with lockring; adjustable at the camera (190° Tilt, 360° Turn & 360° Rotation)
- Knob and tamper-resistant set-screw adjusting options included. Matching vinyl cover adds a finished look!
Availability: Usually ships within 3-5 business daysPanavise 767-TT2 Tom Tom Indash Adapter - Convert Window Mount to Indash Adapter, PV-767-TT2
SKU: 767-TT2- Allows you to move your Tom Tom to an Indash Mount
- Frees up window for better visibility of road
- Has standard Amps Bolt pattern
- Takes place of window suction cup
Availability: Usually ships within 3-5 business days- Replacement Knobs
- Used with the 315 Circuit Board Holder, 333 Rapid Assembly Circuit Board Holder, and 324 Electronic Work Center
Availability: Usually ships within 3-5 business days- Perfect for low volume, mass termination of various IDC connectors on ribbon cable
- Smoothly and securely terminates up to 64-pin conductor cable
- More effective than hand crimpers (eliminates the 'scissor effect')
- Helps prevent injuries to wrist, hands, nerves and tendons
Availability: Usually ships within 3-5 business days- 13" (330.2mm) overall mount length (including shaft and ends)
- Double wound shaft will not droop or require safety wires
- Shaft is covered with durable black vinyl
- Full range of motion at the camera: 210° Tilt, 360° Turn & 360° Rotation
- 1/4-20 mounting stud with lockring
Availability: Usually ships within 3-5 business days- Double suction cup mount with bridge, double knuckle, & AMPS head
Availability: Usually ships within 3-5 business days- Modular system: Base, Shaft and Head screw together
- Two aluminum shafts [0.5" (12.7mm) diameter] will make a 2" (50.8mm), 4" (101.6mm) or 6" (152.4mm) long mount. 1/4-20 stud with lockring
- Fully adjustable at the camera (190° Tilt, 360° Turn & 360° Rotation)
- Knob and tamper-resistant set-screw adjusting options included. Matching vinyl cover adds a finished look!
- Includes 2" (50.8 mm) round Base with four 0.188" (4.8mm) holes on 1.6" (40.6mm) bolt circle for solid surface mounting, and a T-Bar Clip for drop ceiling rails
Availability: Usually ships within 3-5 business days- 0.5" (12.7mm) diameter solid steel shaft
- 1/4-20 mounting stud with lockring
- Fully adjustable at the camera (190° Tilt, 360° Turn & 360° Rotation)
- Knob and tamper-resistant set-screw adjusting options included. Matching vinyl cover adds a finished look!
- 6" (152.4mm) overall length
Availability: Usually ships within 3-5 business daysPanavise Miscellaneous- Proprietary Accessories- Categories
- Price
-
$4$60Price Up to $60
-
- Manufacturer
- Panavise (79)
- Form
- Mount Type
- Ceiling Mounts (2)
- Wall Mounts (4)
- Outdoor Use
- No (4)
Panavise Miscellaneous- Proprietary Accessories
Copyright @ Surveillance-video 2018800-955-5201Customer Service
Call or email today to speak with
one of our customer service specialistsTechnical Support
Call or email today to speak with
one of our customer service specialistsTrusted SupplierSECURING THE WORLD FOR 45+ YEARS
Address: 387 Canal St New York, NY 10013
Phone: 1.800.955.5201
Email: info@Surveillance-Video.com
Working Days/Hours:
Mon - Fri: 8:30am - 6:00pm EST
Sat & Sun: Closed
My AccountCompany InformationCloseThank you, we have received your request. A customer
Continue Shopping
support representative will contact you shortly.Sign into Surveillance-video.com
Please enter your email below and we will send you a new password.Create New Account
- General
- Reseller
- Corporate
- Government
- Educational
*Instant Approval
Customer account for end users.
Benefits: Discount Pricing, Order History, Fast Re-order. Instant Approval.*24-48 hour Approval Process
Large volume reseller account.
Benefits: Volume Discount Pricing, Private Sale Fast Re-order.*24-48 hour Approval Process
Large corporations.
Benefits: Discount Pricing, Fast Re-Order, Order History.*24-48 hour Approval Process
Govenment - Government Agencies.
Benefits: GSA Discount Pricing, Fast Re-order, Order History.*24-48 hour Approval Process
Educational Institutions.
Benefits: Discount Pricing, Fast Re-Order, Order History.orOther Social Login
Private Sales Sign Up
Sign Up to receive weekly deals, big saving coupons, and all of our inside deals that will save you money.
*Email:
*Surveillance-video.com will not share your email address with any 3rd parties.
