MuxLab Audio & Video UTPs - RJ-45, RCA, Screw Terminals
-
MuxLab 500015 LongReach Active CCTV Receiver Balun
- Up to 5,000 feet (1,524m) via Cat5e/6
- Supports NTSC and PAL
- Automatic Image Adjustment
- Requires 24VAC (not supplied)
- Ground Loop Blocking
-
MuxLab 500701-2PK HD-SDI Balun, 2-Pack
- Supports SD and HD (720p,1080i) resolutions
- Up to 150 ft (45m) via Cat5e cable @ HD
- Up to 400 ft (120m) via Cat5e cable @ SD
- Supports Cat5e/6 cable
- Cast aluminum enclosure
-
MuxLab 500100 Active CCTV Transmitter Balun, 12VDC
- Low power consumption
- Derives power from camera power supply
- Ground loop isolation
- Gain compensation switch for 500 to 3,000 ft
- Fits inside CCTV dome cameras and back boxes
-
MuxLab 500028 Stereo Hi-Fi Balun
- 20 Hz to 20 KHz bandwidth
- Cost-efficient cabling
- Up to 3,250 ft (1km) via Cat5e/6 UTP
- Color-coded RCA cable leads
- Quicker moves, adds and changes
-
MuxLab 500130 Passive CCTV Hub, UTP / Coax
- Port switch to set Power-Thru or Pass-Thru mode
- Pin configuration table on unit
- Space efficient, rackmountable
-
MuxLab 500142 Active VGA Balun II, RX, No Power
- Up to 600 ft (180m) via Cat5e/6 @ 1920 x 1440
- Up to 600 ft (180m) via Cat5e/6 @ 1080p
- Remote power pass-thru up to 150 ft (46m)
- DDC1/DDC2 (Plug-and-Play) Compliant
- Manual gain compensation
-
MuxLab 500124 LongReach II Active CCTV Receiver Balun
- Up to 5,000 feet (1.5 km) via Cat5e/6
- Up to 7,000 feet (2.1 km) via Cat5e/6 with
- 500100/101 at camera
- Video, power and PTZ over one Cat5e/6
- Auto Gain Control (AGC)
-
MuxLab 500041 VGA Balun II DB15F Monitor Side
- Fully supports Cat5E/6 unshielded twisted pair (UTP)
- Cost efficient versus VGA cable
- Use existing structured cabling system
- Save conduit space
-
MuxLab 500018 S-Video / Audio Ground Loop Isolation Balun
- Up to 1,000 feet (305m) via Cat5e/6 UTP
- Stereo audio up to 3,250 ft (990m)
- Ground Loop Isolation (GLI)
- Helps eliminate “hum bars”
- Only one required per connection
