Questions? Feedback? powered by Olark live chat software
 
 

Welcome

Chat Support
Toll Free800.955.5201
Free shipping on all purchases over $500
SHOP NEW REFURBISHED

Currently Shopping by

  1. Manufacturer: CNB Remove This Item, Panavise Remove This Item

CNB Technology’s vision is to become a leader in the CCTV security industry.

By planning ahead with aggressive investment in R & D and designing products with the most innovative features available CNB is positioning itself to gain a large market share over the coming years. This is great for their customers and the industry, as new ideas and technologies are integrated into the industry they become industry standards benefiting everyone. The competitive nature of CNB keeps their price point low and their quality of product high, so you can rest assured that if buy CNB the product will not only be of an extremely high quality but it will be backed by after sales support that is second to none.

With offices in the USA, China and Europe it is possible for anyone to contact their local office directly allowing CNB to provide only the highest standard of customer service.

For warranty information click here: http://www.cnbtec.com/en/html/support/warranty.php

PanaVise is a major manufacturer of mobile electronics mounts for GPS units, satellite radio receivers, mobile video screens, CCTV camera mounts, mobile data terminals and circuit board holders. Their products are designed to last in the punishing environment of mobile electronics where large temperature fluctuations, vibrations and high levels of impact happen every day. In the security industry, PanaVise is a premier supplier of high quality CCTV camera mounts with a range that will suit every application and last in just about any environment.

Having been in the industry for over 50 years PanaVise know that it’s not just great products that matter its great service as well. When you contact them via phone or email you will always get a prompt efficient response to your enquiry and helpful suggestions as to the types of products that might suit your needs.

For warranty information click here: http://www.panavise.com/index.html?PageID=56&PageName=Warranty&sec_id=56&sec_status=[sec_status]class=


PanaVise Products, Inc.

Tel:(800) 759-7535
Fax: (800) 395-8002

Set Descending Direction

122 Item(s)
checkprodtFromhere
  1. CNB CVB110 Ceiling Mount Bracket for Vandal Proof Dome Camera
    Add to Compare
    Price: $23.59
    Add to Wishlist

      • Use with V1, V2, VBM, VCM, and LDM SERIES
      • Ceiling Mount Bracket for Outdoor Vandal-Resistant Dome Cameras
      • Fits 1.75" and 1" Pipe
  2. CNB SIB1000 In-Ceiling Bracket - Indoor Speed Dome (S1765N)
    Add to Compare
    Price: $29.04
    Add to Wishlist

      • In-ceiling mount bracket for Indoor Speed Dome
      • Material: Polycarbonate, Steel
  3. CNB SMPB3000 Pendant Mount Bracket for Mini Outdoor Speed Dome
    Add to Compare
    Price: $61.88
    Add to Wishlist

      • Ceiling mount bracket for Mini SNB-23Z12F Outdoor Speed Dome
      • Material: Aluminum
  4. CNB SMWB3000 Outdoor Wall Mount for SNB & SMB Mini Speed Domes
    Add to Compare
    Price: $53.30
    Add to Wishlist

      • Wall Mount for SNB & SMB Mini Speed Domes
      • Indoor/Outdoor use
  5. CNB SOB2000 Pole Mount Bracket for Indoor/Outdoor Speed Dome
    Add to Compare
    Price: $43.56
    Add to Wishlist

      • Pole mount bracket for Outdoor Speed Dome
      • Material: Aluminum
  6. CNB SPB1000 Pendant (Pole) Mount - Indoor Speed Dome (S1765N)
    Add to Compare
    Price: $36.30
    Add to Wishlist

      • Pendant mount bracket for Indoor Speed Dome
      • Material: Aluminum, Steel
  7. CNB SPB2000 Pendant Mount Bracket for Outdoor Speed Dome
    Add to Compare
    Price: $78.52
    Add to Wishlist

      • Pendant Mount Bracket
      • For Outdoor Speed Dome
  8. CNB SWB1000 Wall Mount - Indoor Speed Dome
    Add to Compare
    Price: $32.40
    Add to Wishlist

      • Wall mount bracket for Indoor Speed Dome
      • Material: Aluminum
  9. CNB SWB2000 Wall Mount Bracket for Outdoor Speed Dome
    Add to Compare
    Price: $105.30
    Add to Wishlist

      • Wall Mount Bracket
      • For Outdoor Speed Dome
  10. CNB WDB101 Wall Mount Type Aluminum Bracket for Van
    Add to Compare
    Price: $32.40
    Add to Wishlist

      • Wall Mount Bracket for Vandal-resistant Dome Camera
      • Material- Aluminum
  11. CNB WDB201 Wall Mount Type Plastic Bracket for Vandal-Resistant Dome
    Add to Compare
    Price: $15.96
    Add to Wishlist

      • Use with V1000, VBM, and IVP4000 Series
      • Wall Mount Type Plastic Bracket for Vandal-Resistant Dome & IP Vandal-Resistant Dome
      • Material Polycarbonate
  12. CNB WDB202 Wall Mount Type Plastic Bracket for Vandal-Resistant
    Add to Compare
    Price: $15.96
    Add to Wishlist

      • Use with V2000, D2000, IDP2000 Series
      • Wall Mount Type Plastic Bracket for Vandal-Resistant Dome & General Domes and IP General Domes
      • Material Polycarbonate
  13. CNB WDB203 Wall Mount Type Plastic Bracket for Eyeball Tye Dome
    Add to Compare
    Price: $15.96
    Add to Wishlist

      • Use with D2000 and VB2000 Series
      • Wall Mount Type Plastic Bracket for Eyeball Tye Dome & General Dome
      • Material: Polycarbonate
  14. CNB WDB204 Wall Mount Type Plastic Bracket for General Dome
    Add to Compare
    Price: $15.96
    Add to Wishlist

      • Use with DBM Series Cameras
      • Wall Mount Type Plastic Bracket
      • Material Polycarbonate
  15. CNB WMB200 Wall Mount Bracket
    Add to Compare
    Price: $6.80
    Add to Wishlist

      • For Wall Mounting
      • Adjustable Swivel Head
      • Rugged Plastic Construction
  16. CNB WMB65 Universal Wall & Ceiling Pedestal Camera Mount
    Add to Compare
    Price: $6.80
    Add to Wishlist

      • Universal wall, ceiling, pedestal camera mount with adjustable swivel head
      • 1/4-20 threaded stud with nut
      • Dimensions : 78(Ø)x111.27(H)mm
  17. Panavise 100106B Speaker Wall Mount Black
    Add to Compare
    Price: $31.95
    Add to Wishlist

      • Two adjusting points offer a full range of motion
      • Includes nylon safety strap and mounting hardware
      • Comes with 16-gauge steel surface mounting plate
  18. Panavise 100106W 8 lb Speaker Mount (Cream)
    Add to Compare
    Price: $28.95
    Add to Wishlist

      • Two adjusting points offer a full range of motion
      • Includes nylon safety strap and mounting hardware
      • Comes with 16-gauge steel surface mounting plate
  19. Panavise 105108B 8 lb Stud Mount (Black)
    Add to Compare
    Price: $13.04
    Add to Wishlist

      • One adjusting points offer a full range of motion
      • Includes nylon safety strap and mounting hardware
      • Comes with 16-gauge steel surface mounting plate
  20. Panavise 105108W 8 lb Stud Mount (White)
    Add to Compare
    Price: $20.49
    Add to Wishlist

      • One adjusting points offer a full range of motion
      • Includes nylon safety strap and mounting hardware
      • Comes with 16-gauge steel surface mounting plate
  21. Panavise 110120B 20 lb Speaker Mount (Black)
    Add to Compare
    Price: $40.99
    Add to Wishlist

      • Two adjusting points offer a full range of motion
      • Includes Plastic coated, steel safety cable and mounting hardware
      • Comes with Cast aluminum surface mounting plates
  22. Panavise 110120W 20 lb Speaker Mount (White)
    Add to Compare
    Price: $28.35
    Add to Wishlist

      • Two adjusting points offer a full range of motion
      • Includes Plastic coated, steel safety cable and mounting hardware
      • Comes with Cast aluminum surface mounting plates
  23. Panavise 120140B 40 lb Short Drop Ceiling Mount (Black)
    Add to Compare
    Price: $38.22
    Add to Wishlist

      • Easy "one person" installation with our unique hanging system
      • Base locks firmly into place for worry-free installations
      • Plastic coated, steel safety cable and mounting hardware included
      • Includes matching bracket cover
  24. Panavise 120140W 40 lb Short Drop Ceiling Mount (White)
    Add to Compare
    Price: $59.99
    Add to Wishlist

      • Easy "one person" installation with our unique hanging system
      • Base locks firmly into place for worry-free installations
      • Plastic coated, steel safety cable and mounting hardware included
      • Includes matching bracket cover
  25. Panavise 120240B 40 lb Long Drop Ceiling Mount (Black)
    Add to Compare
    Price: $64.99
    Add to Wishlist

      • Easy "one person" installation with our unique hanging system
      • Base locks firmly into place for worry-free installations
      • Plastic coated, steel safety cable and mounting hardware included
      • Includes matching bracket cover
  26. Panavise 120240W 40 lb Long Drop Ceiling Mount (White)
    Add to Compare
    Price: $64.99
    Add to Wishlist

      • Easy "one person" installation with our unique hanging system
      • Base locks firmly into place for worry-free installations
      • Plastic coated, steel safety cable and mounting hardware included
      • Includes matching bracket cover
  27. Panavise 120340B 40 lb Wall Mount (Black)
    Add to Compare
    Price: $43.68
    Add to Wishlist

      • Easy "one person" installation with our unique hanging system
      • Base locks firmly into place for worry-free installations
      • Plastic coated, steel safety cable and mounting hardware included
      • The 60° bend in steel shaft places center of adjusting base
  28. Panavise 120340B-75MM Wall Mount 75MM Plate
    Add to Compare
    Price: $38.22
    Add to Wishlist

      • Easy "one person" installation with our unique hanging system
      • Holds flat panel screens weighing up to 40 lbs. (18.2kg)
      • Overall length from top of wall bracket to center of adjusting base 9.1" (231.1mm)
      • Shaft is 0.625" (15.9mm) in diameter. Wall bracket is 2"x 5.25" (50.8 mm x 133.3mm) with two mounting holes 3.75" (95.3mm) apart
      • Matching cover plate is 2.125"wide x 5.375"high x 2.5"deep (5mm x 136.5mm x 63.5mm)
      • 60° bend in steel shaft places center of adjusting base approx. 5.375" (136.5mm) from wall
      • VESA compatible mounting plate (75mm pattern). Includes hardware mounting kit
  29. Panavise 120340W 40 lb Wall Mount (White)
    Add to Compare
    Price: $64.99
    Add to Wishlist

      • Easy "one person" installation with our unique hanging system
      • Base locks firmly into place for worry-free installations
      • Plastic coated, steel safety cable and mounting hardware included
      • The 60° bend in steel shaft places center of adjusting base
  30. Panavise 15101 NoSKID Weighted Dashboard Mount
    Add to Compare
    Price: $9.59
    Add to Wishlist

      • Portable, easily move from vehicle to vehicle and stow for security
      • Non-skid bottom contours to dash preventing sliding
      • 3.5 inch diameter disc for suction cup mounts
      • Weighted bag to prevent movement
      • Ideal for states where attaching mounts to a windshield is illegal
  31. Panavise 15504 Portagrip Smartphone Holder with 811 Suction Cup Mount
    Add to Compare
    Price: $15.81
    Add to Wishlist

      • Once the arm width is set, phone is easily removed by rocking it to the side with a one-handed motion
      • Rubberized indexed grippers and foam backed cradle won’t scratch your device
      • Vertical low profile grips allow full access to touch screens
      • Quick release button for easy phone access
      • Ratcheted feet allow for access to data ports
  32. Panavise 15508 Portagrip Phone Holder with 809-AMP Suction Cup Mount
    Add to Compare
    Price: $25.15
    Add to Wishlist

      • Once the arm width is set, phone is easily removed by rocking it to the side with a one-handed motion
      • Rubberized indexed grippers and foam backed cradle won’t scratch your device
      • Vertical low profile grips allow full access to touch screens
      • Quick release button for easy phone access
      • Ratcheted feet allow for access to data ports
  33. Panavise 15509 Portagrip Phone Holder with 709-B Suction Cup Mount
    Add to Compare
    Price: $31.82
    Add to Wishlist

      • Once the arm width is set, phone is easily removed by rocking it to the side with a one-handed motion
      • Rubberized indexed grippers and foam backed cradle won’t scratch your device
      • Vertical low profile grips allow full access to touch screens
      • Quick release button for easy phone access
      • Ratcheted feet allow for access to data ports
  34. Panavise 15571 Portagrip Phone Holder with 717-06 Pedestal Mount
    Add to Compare
    Price: $20.79
    Add to Wishlist

      • Rubberized indexed grippers and foam backed cradle won’t scratch your device
      • Quick release button for easy phone access
      • Vertical low profile grips allow full access to touch screens
      • Side arms adjust from 2.25" to 3.75" in width to fit nearly any phone
      • Ratcheted feet allow for access to data ports
  35. Panavise 15575 Portagrip Phone Holder with AMPS Adapter Plate
    Add to Compare
    Price: $12.21
    Add to Wishlist

      • Includes PanaVise T-Slot to AMPS adapter plate
      • Attaches easily to any AMPS compatible mount using the included hardware
      • Rubberized indexed grippers and foam backed cradle won’t scratch your device
      • Quick release button for easy phone access
      • Vertical low profile grips allow full access to touch screens
  36. Panavise 15579 Portagrip Phone Holder with 797-12 Uniflex Mount
    Add to Compare
    Price: $37.13
    Add to Wishlist

      • Rubberized indexed grippers and foam backed cradle won’t scratch your device
      • Quick release button for easy phone access
      • Vertical low profile grips allow full access to touch screens
      • Side arms adjust from 2.25" to 3.75" in width to fit nearly any phone
      • Ratcheted feet allow for access to data ports
  37. PanaVise 305MDT MDT Head/Base 90 Degree Tilt with Mount Holes
    Add to Compare
    Price: $35.99
    Add to Wishlist

      • Mix and match heads and base plates as needed
      • Steel and zinc construction for heavy-duty work environments
      • Fully adjustable at both ends
      • Components sold separately
  38. Panavise 320 Standard Phone Mount
    Add to Compare
    Price: $40.49
    Add to Wishlist

      • 6" (152.4mm) overall rise height
      • Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center
      • 5/8" (15.9mm) shafts are easily removed and are interchangeable with any 5/8" (15.9mm) shaft
      • Base can be locked into place with either knob or set-screw adjusting option (both included)
      • Knob or set-screw can be selected and installed on either side of the ball housing
  39. Panavise 322 Deluxe Phone Mount with Knuckle Assembly
    Add to Compare
    Price: $32.76
    Add to Wishlist

      • 6" (152.4mm) overall rise height
      • Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center
      • Mounting plate features 210° Tilt, 360° Turn and Rotation with knob or set-screw adjusting option (both included)
      • 5/8" (15.9mm) shafts are easily removed and are interchangeable with any 5/8" (15.9mm) shaft
      • Base can be locked into place with either knob or set-screw adjusting option (both included)
  40. Panavise 328 Standard Phone Mount Base
    Add to Compare
    Price: $35.99
    Add to Wishlist

      • This phone and communications mount was specifically designed for heavier weights and heavy-duty applications
      • Patented single load control knob and exclusive split-ball feature lock the head into place
      • Load control knob allows adjustment in all three axes (90° tilt, 360° turn and 360° rotation)
      • Removable vise heads are sold separately
      • Works with all 300 series vise heads, the PV Jr 203 Head or any 5/8" diameter shaft
  41. Panavise 329 45/45 Phone Mount Base
    Add to Compare
    Price: $31.95
    Add to Wishlist

      • 45-45° Tilt over center with 360° Turn & 360° Rotation
      • Base footprint has four 0.219" (5.6mm) on a 4.23" (107.5mm) circle
      • Accepts any 5/8" (15.9mm) diameter shaft
  42. Panavise 336-FPMC-100 MM Screen/Camera Mount 100MM Plate (Black)
    Add to Compare
    Price: $99.99
    Add to Wishlist

      • Exclusive design for specialty retail installations
      • VESA compatible mounting plate
      • Threaded for use with 3/4" (19.1mm) rigid conduit or NPT pipe
      • Drop length determined by installer
      • Includes mounting kit and instructions
  43. Panavise 336-FPMC-75 MM Screen/Camera Mount 75MM Plate (Black)
    Add to Compare
    Price: $146.75
    Add to Wishlist

      • Exclusive design for specialty retail installations
      • VESA compatible mounting plate
      • Threaded for use with 3/4" (19.1mm) rigid conduit or NPT pipe
      • Drop length determined by installer
      • Includes mounting kit and instructions
  44. Panavise 336-V100 Work Station Mount 100MM Plate
    Add to Compare
    Price: $21.72
    Add to Wishlist

      • Fully adjustability 90° Tilt, 360° Turn & 360° Rotation ? for precise screen positioning
      • Includes knob or set-screw adjusting options (not pictured)
      • Accepts any 5/8" (15.9mm) diameter shaft
      • Recommended for smaller flat panel screens although maximum weight capacity is up to 40 lbs. (18.2kg)
      • 75mm VESA compatible mounting plate
  45. Panavise 336-V75 Work Station Mount 75MM Plate
    Add to Compare
    Price: $27.95
    Add to Wishlist

      • Fully adjustability 90° Tilt, 360° Turn & 360° Rotation ? for precise screen positioning
      • Includes knob or set-screw adjusting options (not pictured)
      • Accepts any 5/8" (15.9mm) diameter shaft
      • Recommended for smaller flat panel screens although maximum weight capacity is up to 40 lbs. (18.2kg)
      • 75mm VESA compatible mounting plate
  46. PanaVise 336MDT MDT Base/Head - 0/90 Tilt
    Add to Compare
    Price: $24.49
    Add to Wishlist

      • Head with knob adjustment
      • Fully adjustable: 90° Tilt, 360° Turn & 360° Rotation under the terminal
      • Accepts any 5/8" (15.9mm) diameter shaft
  47. Panavise 400MDT MDT Base - 0/90 Tilt
    Add to Compare
    Price: $28.35
    Add to Wishlist

      • Recommended for heavy terminals and electronics
      • Square base measures 4.094" x 4.094" (104 mm x 104 mm)
      • Pre-drilled with four 0.219" (5.6mm) holes
  48. Panavise 627-04 Pedestal Mount, 4" Rise, Knob and Set-Screw Adjusting, T-Bolt Head
    Add to Compare
    Price: $14.99
    Add to Wishlist

      • Pedestal Mount
      • 4" Rise, Knob and Set-Screw Adjusting
      • T-Bolt Head
  49. Panavise 627-06 Pedestal Mount - 6-inch Rise
    Add to Compare
    Price: $15.88
    Add to Wishlist

      • Overall mount height (including shaft) is 6" (152.4mm)
      • T-Bolt measures 0.5" x 0.5" (12.7mm x 12.7mm)
      • 210° Tilt, 360° Turn and 360° Rotation at both ends
      • Aluminum, zinc and steel construction
      • Concave Standard Foot evenly distributes the mounting load, accommodates slightly irregular surfaces, will not crack, and measures 2.5 x 2.5 (63.5mm x 63.5mm)
  50. Panavise 627-06SF Small Foot Pedestal Mount - 6-inch
    Add to Compare
    Price: $15.88
    Add to Wishlist

      • Overall mount height (including shaft) is 6" (152.4mm)
      • T-Bolt measures 0.5" x 0.5" (12.7mm x 12.7mm)
      • 210° Tilt, 360° Turn and 360° Rotation at both ends
      • Aluminum, zinc and steel construction
      • Small Foot measures 1.625" x 2" (41.3mm x 50.8mm)
  51. Panavise 651-S 1/4-20 Adjusting Knuckle with 1/4-20 Stud
    Add to Compare
    Price: $16.50
    Add to Wishlist

      • Full adjustability with knob and set-screw options and lockring included
      • Overall knuckle height approximately 2.5" (63.5mm)
      • Base drilled and tapped 1/4-20
  52. Panavise 651-TS Adjusting Knuckle with T-Bolt
    Add to Compare
    Price: $17.99
    Add to Wishlist

      • Full adjustability with knob and set-screw options and lockring included
      • Overall knuckle height approximately 2.5" (63.5mm)
      • Base drilled and tapped 1/4-20
  53. Panavise 670-A Satellite Radio Adapter Plate
    Add to Compare
    Price: $4.49
    Add to Wishlist

      • AMPS-compatible adapter plate converts any AMPS-compatible mount into an XM-style satellite radio mount!
      • Suitable for any XM satellite radio or electronics with a T-Button mounting system
      • Compatible with all similar systems
      • Made of durable glass fiber-reinforced composite plastic
  54. Panavise 675-BT Quick Release Interface
    Add to Compare
    Price: $7.99
    Add to Wishlist

      • Base and top are AMPS-compatible and provide a quick release interface for a wide variety of electronics including satellite radios and GPS units
      • Quickly remove electronics for security or move them from vehicle-to-vehicle
      • Top firmly attaches to the base with a solid click
      • Made of black, high-impact polycarbonate plastic
      • Simply lift the latch to remove the electronics
  55. Panavise 685-OP Offset Tipper With Amps Head Plate & Hardware
    Add to Compare
    Price: $15.99
    Add to Wishlist

      • Users can easily position and reposition their electronics
      • Smooth adjusting action holds electronics firmly in place
      • Extends approximately 1.5" (38.1mm) from face of mount
      • Body made of black, high-impact polycarbonate plastic with aluminum ball and head plate
  56. Panavise 685-PM AMPS Tipper
    Add to Compare
    Price: $15.99
    Add to Wishlist

      • Interfaces between AMPS-compatible mounting plate and AMPS-compatible electronics
      • Users can easily position and reposition their electronics (30° Tilt & 360° Rotation)
      • Smooth adjusting action holds electronics firmly in place
      • Extends approximately 1.5" (38.1mm) from face of mount
      • Body made of black, high-impact polycarbonate plastic with aluminum ball & head plate
  57. Panavise 685-S 1/4-20 Stud Tipper
    Add to Compare
    Price: $14.99
    Add to Wishlist

      • Interfaces between AMPS-compatible mounting plate and electronics with 1/4-20 female threads
      • Users can easily position and reposition their electronics (30° Tilt & 360° Rotation)
      • Smooth adjusting action holds electronics firmly in place
      • Extends approximately 1.5" (38.1mm) from face of mount
      • Body made of black, high-impact polycarbonate plastic with aluminum ball & head plate
  58. Panavise 702 Flat Base PortaGrip 2000
    Add to Compare
    Price: $21.50
    Add to Wishlist

      • Fits a wide variety of hand-held electronics; flat base.
      • Width adjusts to accommodate electronics from 1.16" (29.5mm) to 2.5" (63.5mm)
      • Vertical adjustment of 1.4" (35.6mm) allows the user to adjust holder to avoid side buttons, ports and knobs
      • No tools required to adjust the jaws; jaws open with a quickrelease button
      • Sure grip soft jaws hold firmly, but gently, won't scratch
  59. Panavise 703 Cup Base PortaGrip 2000
    Add to Compare
    Price: $12.99
    Add to Wishlist

      • Width adjusts to accommodate electronics from 1.16" (29.5mm) to 2.5" (63.5mm)
      • Vertical adjustment of 1.4" (35.6mm) allows the user to adjust holder to avoid side buttons, ports and knobs
      • No tools required to adjust the jaws; jaws open with a quick release button
      • Sure grip soft jaws hold firmly, but gently wont scratch
      • Attaches easily to any AMPS-compatible mount (mount required for installation; sold separately)
  60. Panavise 706 Ipod Classic Holder
    Add to Compare
    Price: $14.18
    Add to Wishlist

      • Simply rotate the arms to adjust the spacing for iPods with skin, no skin or case
      • Spring-loaded arms gently, yet securely, hold all iPod classic models
      • Neoprene rubber pads help protect the back of the iPod
      • Includes the PanaVise model 670X T-Slot adapter
      • The T-Slot adapter attaches easily to any AMPS compatible mount using the included hardware
  61. Panavise 706-811 Ipod Classic Holder with Window Mount
    Add to Compare
    Price: $17.01
    Add to Wishlist

      • Simply rotate the arms to adjust the spacing for iPods with "Skin," "No Skin" or "Case"
      • Spring-loaded arms gently, yet securely, hold all iPod classic models
      • Neoprene rubber pads help protect the back of your iPod
  62. Panavise 709B WindowGrip Deluxe Telescoping Mount
    Add to Compare
    Price: $34.99
    Add to Wishlist

      • Telescoping arm adjusts from 13.25" (336.6mm) to 18" (457.2mm)
      • Arm locks firmly into position and is indexed to prevent rotation
      • Aircraft grade aluminum alloy shaft
      • Arm has 140° motion; knob locks arm into place
      • Full range of motion under the electronics:210° Tilt, 360° Turn & 360° Rotation
  63. Panavise 717-06 Slimline 2000 Pedestal, 6-inch
    Add to Compare
    Price: $11.88
    Add to Wishlist

      • Overall mount height (including shaft) is 6" (152.4mm)
      • 210° Tilt, 360° Turn and 360° Rotation at both ends
      • Head plate is molded of durable glass fiber-reinforced composite plastic
      • Aluminum alloy shaft
      • Housings at the head and foot incorporate a serrated contact design that increases gripping power at the adjusting points
  64. Panavise 717-06SF Slimline 6" Rise-Knob and Set Screw Adjusting, Small Foot
    Add to Compare
    Price: $16.99
    Add to Wishlist

      • AMPS-compatible, Knob and set-screw adjusting options included
      • Overall mount height (including shaft) is 6" (152.4mm)
      • 210° Tilt, 360° Turn and 360° Rotation at both ends
      • Head plate is molded of durable glass fiber-reinforced composite plastic
      • Aluminum alloy shaft
  65. Panavise 717-09 Slimline 2000 Pedestal, 9-inch
    Add to Compare
    Price: $14.47
    Add to Wishlist

      • Overall mount height (including shaft) is 9" (228.6mm)
      • 210° Tilt, 360° Turn and 360° Rotation at both ends
      • Head plate is molded of durable glass fiber-reinforced composite plastic
      • Aluminum alloy shaft
      • Housings at the head and foot incorporate a serrated contact design that increases gripping power at the adjusting points
  66. Panavise 717-09SF Slimline 9" Rise-Knob and Set Screw Adjusting, Small Foot
    Add to Compare
    Price: $20.99
    Add to Wishlist

      • AMPS-compatible, Knob and set-screw adjusting options included
      • Overall mount height (including shaft) is 9" (228.6mm)
      • 210° Tilt, 360° Turn and 360° Rotation at both ends
      • Head plate is molded of durable glass fiber-reinforced composite plastic
      • Aluminum alloy shaft
  67. Panavise 727-04 Slimline Pedestal, 4-inch
    Add to Compare
    Price: $22.49
    Add to Wishlist

      • Overall mount height (including shaft) is 4" (101.6mm)
      • 210° Tilt, 360° Turn & 360° Rotation under the component
      • Aluminum, zinc and steel construction
      • Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center
      • Concave Standard Foot evenly distributes the mounting load, accommodates slightly irregular surfaces, will not crack, and measures 2.5 x 2.5 (63.5mm x 63.5mm)
  68. Panavise 727-04SF Small Foot Slimline Pedestal, 4-inch
    Add to Compare
    Price: $13.61
    Add to Wishlist

      • Overall mount height (including shaft) is 4" (101.6mm)
      • 210° Tilt, 360° Turn & 360° Rotation under the component
      • Aluminum, zinc and steel construction
      • Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center
      • Small Foot measures 1.625" x 2" (41.3mm x 50.8mm)
  69. Panavise 727-06 Slimline Pedestal, 6-inch
    Add to Compare
    Price: $17.44
    Add to Wishlist

      • Overall mount height (including shaft) is 6" (152.4mm)
      • 210° Tilt, 360° Turn & 360° Rotation at both ends
      • Aluminum, zinc and steel construction
      • Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center
      • Concave Standard Foot evenly distributes the mounting load, accommodates slightly irregular surfaces, will not crack, and measures 2.5 x 2.5 (63.5mm x 63.5mm)
  70. Panavise 727-06SF Small Foot Slimline Pedestal, 6-inch
    Add to Compare
    Price: $25.49
    Add to Wishlist

      • Overall mount height (including shaft) is 6" (152.4mm)
      • 210° Tilt, 360° Turn & 360° Rotation at both ends
      • Aluminum, zinc and steel construction
      • Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center
      • Small Foot measures 1.625" x 2" (41.3mm x 50.8mm)
  71. Panavise 727-09 Slimline Pedestal, 9-inch
    Add to Compare
    Price: $29.49
    Add to Wishlist

      • Overall mount height (including shaft) is 9" (228.6mm)
      • 210° Tilt, 360° Turn & 360° Rotation at both ends
      • Aluminum, zinc and steel construction
      • Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center
      • Concave Standard Foot evenly distributes the mounting load, accommodates slightly irregular surfaces, will not crack, and measures 2.5 x 2.5 (63.5mm x 63.5mm)
  72. Panavise 727-09SF Small Foot Slimline Pedestal, 9-inch
    Add to Compare
    Price: $26.99
    Add to Wishlist

      • Overall mount height (including shaft) is 9" (228.6mm)
      • 210° Tilt, 360° Turn & 360° Rotation at both ends
      • Aluminum, zinc and steel construction
      • Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center
      • Small Foot measures 1.625" x 2" (41.3mm x 50.8mm)
  73. Panavise 727-12 Slimline Pedestal, 12-inch
    Add to Compare
    Price: $20.98
    Add to Wishlist

      • Overall mount height (including shaft) is 12" (304.8mm)
      • 210° Tilt, 360° Turn & 360° Rotation at both ends
      • Aluminum, zinc and steel construction
      • Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center
      • Concave Standard Foot evenly distributes the mounting load, accommodates slightly irregular surfaces, will not crack, and measures 2.5 x 2.5 (63.5mm x 63.5mm)
  74. Panavise 727-12SF Slimline 12" Rise-Knob and Set Screw Adjusting, Small Foot
    Add to Compare
    Price: $35.99
    Add to Wishlist

      • AMPS-compatible, Knob and set-screw adjusting options included
      • Overall mount height (including shaft) is 12" (304.8mm)
      • 210° Tilt, 360° Turn & 360° Rotation at both ends
      • Aluminum, zinc and steel construction
      • Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center
  75. Panavise 767-GR2 Garmin Adapter Plate
    Add to Compare
    Price: $13.99
    Add to Wishlist

      • Install this adapter on to your AMPS pattern device including PanaVise InDash Mounts, Pedestal and Flex Mounts
      • Will also adapt to any 17mm diameter ball socket
      • Works with most Motorola cradles
  76. Panavise 777 ClipCaddy Holder
    Add to Compare
    Price: $6.99
    Add to Wishlist

      • Includes two buttons and double-sided tape to convert anything to button-back mounting
      • Use in the car for phones or MP3 players, or at home to keep your remotes close-at-hand
  77. Panavise 782-06 6-inch Stay-Put Flex Mount
    Add to Compare
    Price: $15.31
    Add to Wishlist

      • Overall mount length (including the shaft) is 6" (152.4mm)
      • Patented pinch design" prevents the flex shaft from coming loose from the base or the mounting plate
      • Double wound shaft, vinyl coated for heavy-duty protection
      • Base can be mounted vertically or horizontally; the shaft easily screws into either configuration
      • Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center
  78. Panavise 782-08 Stay-Put Flex Mount, 8
    Add to Compare
    Price: $24.17
    Add to Wishlist

      • Overall mount length (including the shaft) is 8" (203.2mm)
      • Patented pinch design" prevents the flex shaft from coming loose from the base or the mounting plate
      • Double wound shaft, vinyl coated for heavy-duty protection
      • Base can be mounted vertically or horizontally; the shaft easily screws into either configuration
      • Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center
  79. Panavise 782-10 Stay-Put Flex Mount
    Add to Compare
    Price: $16.44
    Add to Wishlist

      • Overall mount length (including the shaft) is 10" (254.0mm)
      • Patented pinch design" prevents the flex shaft from coming loose from the base or the mounting plate
      • Double wound shaft, vinyl coated for heavy-duty protection
      • Base can be mounted vertically or horizontally; the shaft easily screws into either configuration
      • Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center
  80. Panavise 782-12 Stay-Put Flex Mount
    Add to Compare
    Price: $17.58
    Add to Wishlist

      • Overall mount length (including the shaft) is 12" (304.8mm)
      • Patented pinch design" prevents the flex shaft from coming loose from the base or the mounting plate
      • Double wound shaft, vinyl coated for heavy-duty protection
      • Base can be mounted vertically or horizontally; the shaft easily screws into either configuration
      • Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center
  81. Panavise 797-10 UniFlex Mount
    Add to Compare
    Price: $18.71
    Add to Wishlist

      • Overall mount length (including the shaft) is 10" (254.0mm)
      • Patented pinch design" prevents the flex shaft from coming loose from the base or the mounting plate
      • Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center
      • We added an adjusting point under the AMPS-compatible mounting plate with 210° Tilt, 360° Turn & 360° Rotation
      • Knob and set-screw adjusting options included
  82. Panavise 797-12 UniFlex Mount
    Add to Compare
    Price: $27.99
    Add to Wishlist

      • Overall mount length (including the shaft) is 12" (304.8mm)
      • Patented "pinch design" prevents the flex shaft from coming loose from the base or the mounting plate
      • Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center
      • We've added an adjusting point under the AMPS-compatible mounting plate with 210° Tilt, 360° Turn & 360° Rotation
      • Knob and set-screw adjusting options included
  83. Panavise 797-14 UniFlex Mount
    Add to Compare
    Price: $28.47
    Add to Wishlist

      • Overall mount length (including the shaft) is 14" (355.6mm)
      • Patented "pinch design" prevents the flex shaft from coming loose from the base or the mounting plate
      • Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center
      • We've added an adjusting point under the AMPS-compatible mounting plate with 210° Tilt, 360° Turn & 360° Rotation
      • Knob and set-screw adjusting options included
  84. Panavise 797-20 20" UniFlex Mount with Knob and Set-Screw Adjusting
    Add to Compare
    Price: $39.00
    Add to Wishlist

      • Knob and Set-Screw Adjusting Option
      • 210° Tilt, 360° Turn and 360° Rotation
      • Double wound shaft, vinyl coated for heavy-duty protection
      • Overall Mount Length: 20" (50.80cm)
      • Rectangular AMPS Pattern: 30 x 38mm (1.18 x 1.49")
  85. Panavise 809 CCTV Camera Window Mount (up to 3 lbs.)
    Add to Compare
    Price: $17.01
    Add to Wishlist

      • Quickly move cameras from vehicle-to-vehicle or location-to-location
      • 1/4-20 stud with lockring
      • Powerful suction pad attaches to any smooth, flat, non-porous surface including windshields, windows and two-way mirrors
      • Full range of motion at the camera (knob adjustment): 210 degree Tilt, 360 degree Turn & 360 degree Rotation
      • Ratcheted arm has 140 degree vertical motion; knob locks arm into place
  86. Panavise 809-AMP Standard AMPS Window Mount
    Add to Compare
    Price: $22.99
    Add to Wishlist

      • Ratcheted arm has 140° vertical motion; knob locks arm into place
      • Recommended for electronics weighing
      • Compatible with a wide variety of electronics and accessories
  87. Panavise 809-G Window Mount With Garmin Adapter
    Add to Compare
    Price: $17.01
    Add to Wishlist

      • Quickly move GPS unit from vehicle-to-vehicle or stow for security
      • Includes Garmin Adapter ball allowing it to be used with any Garmin GPS device with a ball-socket mounting option
      • Powerful suction pad attaches to any smooth, flat, non-porous surface including windshields and windows
      • Full range of motion at the ball (knob adjustment): 210° Tilt, 360° Turn & 360° Rotation
      • Ratcheted arm has 140° vertical motion; knob locks arm into place
  88. Panavise 809-PG Window Mount with Electronics Holder
    Add to Compare
    Price: $24.38
    Add to Wishlist

      • Ratcheted arm has 140° vertical motion; knob locks arm into place
      • Recommended for electronics weighing
      • Compatible with a wide variety of electronics and accessories
  89. Panavise 809-QR Quick Release Window Mount
    Add to Compare
    Price: $22.90
    Add to Wishlist

      • Ratcheted arm has 140° vertical motion; knob locks arm into place
      • Recommended for electronics weighing
      • Simply lift the latch to remove the electronics
  90. Panavise 809-TS T-Bolt Window Mount
    Add to Compare
    Price: $26.99
    Add to Wishlist

      • Ratcheted arm has 140° vertical motion; knob locks arm into place
      • Recommended for electronics weighing
  91. Panavise 827-06 Deluxe Mount W/ Knob Adjustment
    Add to Compare
    Price: $15.88
    Add to Wishlist

      • Set Knob adjustment for a tamper resistant install. Wrench included
      • Available in 6" (152.4mm) (826-06) or 9" (228.6mm) (826-09) overall length
      • Available in Black or Cream, Add "W" to end of part number when ordering Cream
      • 6" (152.4mm) mounts pictured
  92. Panavise 827-06W CCTV Deluxe 6-inch Rise, Knob And Set Screw ADJ White
    Add to Compare
    Price: $15.88
    Add to Wishlist

      • 6" (152.4mm) overall mount length
      • Both adjusting points have a full range of motion: 210° Tilt, 360° Turn & 360° Rotation
      • 1/4-20 mounting stud with lockring
      • Shafts are machined aluminum alloy 0.875" (22.2mm) in diameter
      • Knob and tamper-resistant set-screw
  93. Panavise 827-09 Deluxe Camera Mount, 9-inch (Black)
    Add to Compare
    Price: $17.58
    Add to Wishlist

      • 9" (228.6mm) overall mount length
      • Both adjusting points have a full range of motion: 210 degree Tilt, 360 degree Turn & 360 degree Rotation
      • 1/4-20 mounting stud with lockring
      • Shafts are machined aluminum alloy 0.875" (22.2mm) in diameter
      • Knob and tamper-resistant set-screw adjusting options included
  94. Panavise 845-246 Deluxe Micro Mount
    Add to Compare
    Price: $11.34
    Add to Wishlist

      • Modular system: Base, Shaft and Head screw together
      • Solid steel Shafts [0.5" (12.7mm) diameter] will make a 2" (50.8mm), 4" (101.6mm) or 6"
      • (152.4mm) long mount. 1/4-20 stud with lockring
      • Fully adjustable at the camera (190 degree Tilt, 360 degree Turn & 360 degree Rotation)
      • Knob and tamper-resistant set-screw adjusting options included. Matching vinyl cover adds a finished look
  95. Panavise 846-06 Standard Micro Mount (Black)
    Add to Compare
    Price: $16.20
    Add to Wishlist

      • 0.5" (12.7mm) diameter solid steel shaft
      • 1/4-20 mounting stud with lockring
      • Fully adjustable at the camera (190 degree Tilt, 360 degree Turn & 360 degree Rotation)
      • Knob and tamper-resistant set-screw adjusting options included
      • Matching vinyl cover adds a finished look!
  96. Panavise 847-1/2 Micro Mount for 1/2-inch Conduit (Silver only)
    Add to Compare
    Price: $19.24
    Add to Wishlist

      • For smaller CCTV cameras weighing up to 3 lbs. (1.4kg)
      • For 1/2" (12.7mm) conduit or NPT pipe installs
      • Length from center of flange to center of shaft: 3.5" (88.9mm)
      • Overall mount length: 3.125" (79.4mm)
      • Adjusting point features 210? Tilt, 360 degree Turn & 360 degree Rotation
  97. Panavise 847-3/4 Micro Mount for 3/4-inch Conduit (Silver only)
    Add to Compare
    Price: $19.24
    Add to Wishlist

      • For smaller CCTV cameras weighing up to 3 lbs. (1.4kg)
      • For 1/2" (12.7mm) conduit or NPT pipe installs
      • Length from center of flange to center of shaft: 3.5" (88.9mm)
      • Overall mount length: 3.125" (79.4mm)
      • Adjusting point features 210? Tilt, 360 degree Turn & 360 degree Rotation
  98. Panavise 848-06 Pass Thru Micro Mount (Black)
    Add to Compare
    Price: $14.74
    Add to Wishlist

      • Hollow aluminum shaft [0.5" (12.7mm) outside diameter; 0.375" (9.5mm) inside diameter] with slot for cable pass thru
      • Pass thru slot is 0.375" x 0.625" (9.5mm x 15.9mm)
      • 1/4-20 stud with lockring
      • Fully adjustable at the camera (190 degree Tilt, 360 degree Turn & 360 degree Rotation)
      • Knob and tamper-resistant set-screw adjusting options included
  99. Panavise 849-06 Pass Thru Standard Mount, 6-inch(Black)
    Add to Compare
    Price: $15.31
    Add to Wishlist

      • 6" (152.4mm) overall length (from base to top of lockring)
      • Hollow aluminum shaft [1.0" (25.4mm) outside diameter; 0.875" (22.2mm) inside diameter] with hole for cable pass thru
      • Round pass thru hole is 0.625" (15.9mm) in diameter
      • 1/4-20 mounting stud with lockring
      • Fully adjustable at the camera: 210 degree Tilt, 360 degree Turn & 360 degree Rotation
  100. Panavise 854-06 6" CCTV Magnet Base Mount
    Add to Compare
    Price: $29.99
    Add to Wishlist

      • Ideal for I-beams or any ferrous metal surface
      • Use where magnets are not a problem
      • 6 inch overall length
      • Includes 1/4-20 stud with lock ring
  101. Panavise 854-1/2 Standard Conduit Mount for 1/2-inch Conduit (Silver only)
    Add to Compare
    Price: $19.20
    Add to Wishlist

      • For standard CCTV cameras weighing up to 5 lbs. (2.3kg)
      • For 1/2" (12.7mm) conduit or NPT pipe installs
      • Length from center of flange to center of shaft: 3.5" (88.9 mm)
      • Overall mount length: 3.125" (79.4mm)
      • Adjusting point features 210 degree Tilt, 360 degree Turn & 360 degree Rotation
  102. Panavise 854-3/4 Standard Conduit Mount for 3/4-inch Conduit (Silver only)
    Add to Compare
    Price: $14.88
    Add to Wishlist

      • For standard CCTV cameras weighing up to 5 lbs. (2.3kg)
      • For 3/4" (19.1mm) conduit or NPT pipe installs
      • Length from center of flange to center of shaft: 3.5" (88.9 mm)
      • Overall mount length: 3.125" (79.4mm)
      • Adjusting point features 210 degree Tilt, 360 degree Turn & 360 degree Rotation
  103. Panavise 883-03 Dual Option Mount, 3-inch (Black)
    Add to Compare
    Price: $19.54
    Add to Wishlist

      • 3" (76.2mm) overall mount length
      • Includes two mounting bases that screw easily into the machined aluminum alloy shaft [0.875" (22.2mm) in diameter]
      • Use the Tri-Foot Base [4" (101.6mm) outside diameter with three 0.265" (6.7mm) holes on a 3.25" (82.5mm) bolt circle] for solid
      • surfaces, or the T-Bar Clip for drop ceiling rails
      • Full range of motion at the camera: 210 degree Tilt, 360 degree Turn & 360 degree Rotation
  104. Panavise 883-06 - Dual Option Mount, 6-inch (Black)
    Add to Compare
    Price: $15.88
    Add to Wishlist

      • 6" (152.4mm) overall mount length
      • Includes two mounting bases that screw easily into the machined aluminum alloy shaft [0.875" (22.2mm) in diameter]
      • Use the Tri-Foot Base [4" (101.6mm) outside diameter with three 0.265" (6.7mm) holes on a 3.25" (82.5mm) bolt circle] for solid
      • surfaces, or the T-Bar Clip for drop ceiling rails
      • Full range of motion at the camera: 210 degree Tilt, 360 degree Turn & 360 degree Rotation
  105. Panavise 883-09 - Dual Option Mount, 9-inch (Black)
    Add to Compare
    Price: $21.95
    Add to Wishlist

      • 9" (228.6mm) overall mount length
      • Includes two mounting bases that screw easily into the machined aluminum alloy shaft [0.875" (22.2mm) in diameter]
      • Use the Tri-Foot Base [4" (101.6mm) outside diameter with three 0.265" (6.7mm) holes on a 3.25" (82.5mm) bolt circle] for solid
      • surfaces, or the T-Bar Clip for drop ceiling rails
      • Full range of motion at the camera: 210 degree Tilt, 360 degree Turn & 360 degree Rotation
  106. Panavise 883-T Dual Option Telescoping Mount
    Add to Compare
    Price: $26.08
    Add to Wishlist

      • Adjustable shaft: overall mount length from 9.375" (238.1mm) to 13.625" (346.1mm)
      • Shaft locks tightly and is indexed to prevent rotation
      • Use the Tri-Foot Base [4" (101.6mm) outside diameter with three 0.265" (6.7mm) holes on a 3.25" (82.5mm) bolt circle] for solid surfaces, or the T-Bar Clip for drop ceiling rails
      • Full range of motion: 210° Tilt, 360° Turn & 360° Rotation
      • 1/4-20 mounting stud with lockring
  107. Panavise 897W CCTV J-Box, Knob And Set Screw Adj, White
    Add to Compare
    Price: $26.08
    Add to Wishlist

      • Steel shaft is 0.875" (22.2mm) in diameter (hollow for lighter weight)
      • 1/4-20 mounting stud with lockring
      • Fully adjustable at the camera (210° Tilt, 360° Turn & 360° Rotation)
      • Ball swivel is 6.25" (158.8mm) from wall
      • Height of adjusting point is 3.5" (89mm)
  108. Panavise 898-06 Pass Thru J-Box Micro Mount (Black)
    Add to Compare
    Price: $17.99
    Add to Wishlist

      • Hollow aluminum shaft [0.5" (12.6mm) outside diameter; 0.375" (9.5mm) inside diameter] with slot for cable pass thru
      • Pass thru slot is 0.375" x 0.625" (9.5mm x 15.9mm)
      • 1/4-20 mounting stud with lockring
      • Fully adjustable at the camera (190 degree Tilt, 360 degree Turn & 360 degree Rotation)
      • Integral J-Box mounting plate
  109. Panavise 898-06W Pass Thru J-Box Micro Mount (Cream)
    Add to Compare
    Price: $15.59
    Add to Wishlist

      • Hollow aluminum shaft [0.5" (12.6mm) outside diameter; 0.375" (9.5mm) inside diameter] with slot for cable pass thru
      • Pass thru slot is 0.375" x 0.625" (9.5mm x 15.9mm)
      • 1/4-20 mounting stud with lockring
      • Fully adjustable at the camera (190 degree Tilt, 360 degree Turn & 360 degree Rotation)
      • Integral J-Box mounting plate
  110. Panavise 899-06 Pass Thru J-Box Standard Mount (Black)
    Add to Compare
    Price: $15.59
    Add to Wishlist

      • Hollow aluminum shaft [1.0" (25.4mm) outside diameter; 0.875" (22.2mm) inside diameter] with slot for cable pass thru
      • Round pass thru hole is 0.625" (15.9mm) in diameter
      • 1/4-20 mounting stud with lockring
      • Fully adjustable at the camera (210 degree Tilt, 360 degree Turn & 360 degree Rotation)
      • Integral J-Box mounting plate
  111. Panavise 899-06W Pass Thru J-Box Standard Mount (Cream)
    Add to Compare
    Price: $15.59
    Add to Wishlist

      • Hollow aluminum shaft [1.0" (25.4mm) outside diameter; 0.875" (22.2mm) inside diameter] with slot for cable pass thru
      • Round pass thru hole is 0.625" (15.9mm) in diameter
      • 1/4-20 mounting stud with lockring
      • Fully adjustable at the camera (210 degree Tilt, 360 degree Turn & 360 degree Rotation)
      • Integral J-Box mounting plate
  112. Panavise 909-06 Premier MDT Shaft, 6-inch
    Add to Compare
    Price: $10.77
    Add to Wishlist

      • Premier MDT shaft, 6-inch rise
  113. Panavise 909-09 Premier MDT Shaft, 9-inch
    Add to Compare
    Price: $19.99
    Add to Wishlist

      • Premier MDT shaft, 9-inch rise
  114. Panavise 950-06 Universal Radio Mount, 90° tilt, 6-inch
    Add to Compare
    Price: $52.99
    Add to Wishlist

      • Rugged base features our famous "split ball" for 90° Tilt, 360° Turn & Rotation
      • 6" (152.4mm) overall rise height
      • Universal slotted head plate measures 7.5" x 2.5" (190.5mm x 63.5mm) with 0.25" side slots (slot length varies)
      • Maximum holding power: up to 10 lbs. (4.5kg)
      • Base footprint has four 0.219" (5.56mm) holes on a 4.23" (107.5mm) circle
  115. Panavise 950-09 Universal Radio Mount, 90° tilt, 9-inch
    Add to Compare
    Price: $45.89
    Add to Wishlist

      • Rugged base features our famous "split ball" for 90° Tilt, 360° Turn & Rotation
      • 6" (152.4mm) overall rise height
      • Universal slotted head plate measures 7.5" x 2.5" (190.5mm x 63.5mm) with 0.25" side slots (slot length varies)
      • Maximum holding power: up to 10 lbs. (4.5kg)
      • Base footprint has four 0.219" (5.56mm) holes on a 4.23" (107.5mm) circle
  116. Panavise 951-06 Universal Radio Mount, 45-45° tilt, 6-inch
    Add to Compare
    Price: $33.45
    Add to Wishlist

      • 6" (152.4mm) overall rise height
      • Universal slotted head plate measures 7.5" x 2.5" (190.5mm x 63.5mm) with 0.25" side slots (slot length varies)
      • Maximum holding power: up to 10 lbs. (4.5kg)
      • Base footprint has four 0.219" (5.56mm) holes on a 4.23" (107.5mm) circle
      • Base can be locked into place with either knob or set-screw adjusting option (both included)
  117. Panavise 951-09 Universal Radio Mount, 45-45° tilt, 9-inch
    Add to Compare
    Price: $32.76
    Add to Wishlist

      • 9" (228.6mm) overall rise height
      • Universal slotted head plate measures 7.5" x 2.5" (190.5mm x 63.5mm) with 0.25" side slots (slot length varies)
      • Maximum holding power: up to 10 lbs. (4.5kg)
      • Base footprint has four 0.219" (5.56mm) holes on a 4.23" (107.5mm) circle
      • Base can be locked into place with either knob or set-screw adjusting option (both included)
  118. Panavise 960-06 Mount Stand, 6-inch
    Add to Compare
    Price: $18.14
    Add to Wishlist

      • Rise height is 6" (127mm)
      • Base plate measures 4.25"x 4.25" (108mm x 108mm)
      • Base is pre-drilled with four 0.328" (8.33mm) corner holes
      • Steel shaft is 1" (25.4mm) in diameter at the base and 5/8" (15.9mm) at the top
      • Recommended for use with 336 series Work Station Mounts (sold separately)
  119. Panavise 960-09 Mount Stand, 9-inch
    Add to Compare
    Price: $19.28
    Add to Wishlist

      • Rise height is 9" (203.2mm)
      • Base plate measures 4.25"x 4.25" (108mm x 108mm)
      • Base is pre-drilled with four 0.328" (8.33mm) corner holes
      • Steel shaft is 1" (25.4mm) in diameter at the base and 5/8" (15.9mm) at the top
      • Recommended for use with 336 series Work Station Mounts (sold separately)
  120. Panavise 979-06 Solo Series MDT Mount Shaft Only, 6-inch Rise
    Add to Compare
    Price: $3.15
    Add to Wishlist

      • Solo series MDT mount shaft only, 6" rise
  121. Panavise 979-09 Solo Series MDT Mount Shaft Only, 9-inch Rise
    Add to Compare
    Price: $5.49
    Add to Wishlist

      • Solo series MDT mount shaft only, 9" rise
  122. Panavise120340B-100MM Wall Mount 100MM Plate (Black)
    Add to Compare
    Price: $39.99
    Add to Wishlist

      • Easy "one person" installation with our unique hanging system
      • Holds flat panel screens weighing up to 40 lbs. (18.2kg)
      • Overall length from top of wall bracket to center of adjusting base 9.1" (231.1mm)
      • Shaft is 0.625" (15.9mm) in diameter. Wall bracket is 2"x 5.25" (50.8 mm x 133.3mm) with two mounting holes 3.75" (95.3mm) apart
      • Matching cover plate is 2.125"wide x 5.375"high x 2.5"deep (5mm x 136.5mm x 63.5mm)

See any errors on this page? Let us know.

Set Descending Direction

122 Item(s)
checkprodttohere

Home page footer ads banner