Questions? Feedback? powered by Olark live chat software
 
 

Welcome Guest

Chat Support
Toll Free800.955.5201

My Cart 0 items: $0.00

Free shipping on all purchases over $500
SHOP NEW REFURBISHED

Currently Shopping by

  1. Manufacturer: Pelco Remove This Item

Pelco is a world leader in the design, development and manufacture of video security systems. Its product range includes high-definition cameras, Network IP cameras and video management software. Pelco’s long history in the industry shows through in its product range with each unit crafted to a high standard and packed with the latest features.

Founded in 1957 and based in Clovis, California, Pelco has committed itself to 100% customer satisfaction. In 2007 Pelco began its partnership with Schneider Electric and is committed to delivering high-quality, innovative products and exceptional customer service both now and into the future making Pelco one of the most sought-after supplier in the video security industry

For warranty information click here: http://www.pelco.com/sites/global/en/products/warranty.page


Pelco

Tel: (800) 289-9100
Fax: (800) 289-9150

Support:techsupport@pelco.com
Set Descending Direction

Items 1 - 20 of 26
  1. 1
  2. 2
checkprodtFromhere
  1. Pelco CM9760-CDU-TCM9760 Matrix code distribution unit
    Add to Compare
    Price: $384.85
    Add to Wishlist

      • Two 8-Position, RJ-45 Parallel Connectors Provide an Input from a Controller and an Output for and Additional
      • Daisy-Chained CDU Unit
      • Sixteen 3-Position Screw Terminal Connectors Used to Output 16 RS-422 Transmit-Only Code Lines
      • Allows for Home Run (Star) Type Wiring of PTZ Data Lines
      • Standard 100-240 VAC, 50/60 Hz Line Input (Auto-Ranging)
      • Provides 16 Driver Outputs Continuous monitoring of active and standby CC1s
  2. Pelco CM9760-DMR CM9760 Matrix Data Manager
    Add to Compare
    Price: $929.99
    Add to Wishlist

      • Choose One of Three Different Operating Modes: Keyboard Expander, Camera Control Expander, or Data Merger
      • Connect Up to Four CM9760-KBD Keyboards to One Data Port
      • Address Up to 64 PTZ Cameras From One Data Port
      • Allow Up to Four Matrix Switchers, DVRs, or Direct Keyboards to Share Control of Up to 32 PTZ Cameras
      • Both RJ-45 Connectors and Screw Terminals Are Provided for Each Data Port
  3. Pelco CM9760-ALM Matrix Alarm Interface Up To 64 Inputs
    Add to Compare
    Price: $891.99
    Add to Wishlist

      • Each Unit Can Handle Up to 64 Alarms
      • Up to Four Units Can Be Daisy-Chained From One CM9700 Series CC1 SERCOM Port for a Total of 256
      • Alarms
      • Alarm Inputs Can Be Configured in Groups of 16 for Supervised or Unsupervised Mode
      • Alarm Inputs in Groups of 16 Can Be Wired Either Normally Open or Normally Closed
      • Each Unit Has One Common Alarm Relay Output
  4. Pelco QD104C Quad Color NTSC 120VAC
    Add to Compare
    Price: $466.19
    Add to Wishlist

      • High-Quality Quad Display (1024H x 512V)
      • Real-Time Quad Video
      • Low Cost
      • Four Camera Inputs with Four Looping Outputs
      • Quad Monitor Output That Displays Continuous Four-Camera Image
  5. Pelco CM9700-NW1 CM9700 Configuration for Network Interface Unit
    Add to Compare
    Price: $3,965.50
    Add to Wishlist

      • Connects 1 or More Systems to Network
      • Links 9740 / 9760 / 9780 Systems
  6. Pelco ERD97P-AUX Alarm/Relay Option Board
    Add to Compare
    Price: $152.00
    Add to Wishlist

      • Internal Board Accessory
      • 8 Additional Relay Outputs
      • 24VDC/120VAC Contact Ratings
  7. Pelco CM9770-MXB Video Matrix Bay
    Add to Compare
    Price: $3,151.70
    Add to Wishlist

      • For use with 9770 Series Matrix Switchers
      • Includes a power supply and mounting baffle
      • Supports modules for up to 256 camera inputs and 32 monitor outputs
      • Multiple bays allows you to expand a single CPU system to support 2048 camera Inputs and 512 monitor outputs
      • Mounting baffle supports the weight of the matrix bay
  8. Pelco CM9780-MXB Matrix Switching Bay for CM9780
    Add to Compare
    Price: $4,231.62
    Add to Wishlist

      • 34 card slots: 32 for video input modules and 2 for video output modules
      • Support for up to 512 camera inputs and 32 monitor outputs
      • Expandable to up to 4096 camera inputs and 1024 monitor outputs in a multi-bay setting
      • V-Sync synchronization pulse signal
      • Vertical drive input connector on rear panel
  9. Pelco MS504DT Term Manual Switcher 4 In X 1 Out
    Add to Compare
    Price: $112.46
    Add to Wishlist

      • 4 Inputs
      • Terminating or Looping
      • Desktop or Rack Mount
      • Compatible with Color or B-W Composite Video Signals
      • 120 VAC Input Models Only
  10. Pelco CM9780-VMC High Density 16 Channel Video Monitor Card
    Add to Compare
    Price: $1,429.68
    Add to Wishlist

      • For Use with CM9780 Series Switchers
      • Provides 16 Monitor Outputs
      • Hot-swappable
      • Requires CM9780-RPM Rear Panel Card
  11. Pelco CM9700-VPP 32 Channel Video Patch Panel
    Add to Compare
    Price: $226.20
    Add to Wishlist

      • Microprocessor-Based, Full Cross-Point Video Matrix
      • High-Density Architecture Supports up to 256 Cameras and 32 Monitors in Each Bay
      • Control up to 2,048 Cameras and 512 Monitors in a Single Node or Expand Camera Capacity with a Multi-Node System (up to 24 Nodes)
      • Full System Reports From CM9700-MGR Provide System Wiring and Configuration Details
      • Sixteen RS-422 COM Ports (Expandable to 120) and Two RS-232 full-Duplex Ports Available on the CPU
  12. Pelco CM9760-CPS CM9760 Matrix Computer Peripheral Switch
    Add to Compare
    Price: $1,102.46
    Add to Wishlist

      • Continuous Monitoring of Active and Standby CPUs
      • Automatic or Manual Switching to Standby CPU in the Event of a Failure
      • Diagnostic LEDs Show CPU Status
      • Audible Alert in Case of CPU Failure
      • Manual Control of Diagnostic Monitor and Keyboard Allows Servicing/Programming of Either CPU Without Interrupting System Operation
  13. Pelco CM9765-MXB Video Matrix Bay
    Add to Compare
    Price: $1,343.23
    Add to Wishlist

      • Microprocessor-Based, Full Cross-Point Video Matrix
      • High-Density Architecture Supports up to 256 Cameras and 16 Monitors in Each Bay
      • Control up to 2,048 Cameras and 512 Monitors in a Single Node or Expand Camera Capacity with a Multi-Node System (up to 24 Nodes)
      • Full System Reports From CM9700-MGR Provide System Wiring and Configuration Details
      • Sixteen RS-422 COM Ports (Expandable to 120) and Two RS-232 Full-Duplex Ports Available on the CPU
  14. Pelco CM9765-RPC Rear Panel Video Card
    Add to Compare
    Price: $237.60
    Add to Wishlist

      • Microprocessor-Based, Full Cross-Point Video Matrix
      • High-Density Architecture Supports up to 256 Cameras and 16 Monitors in Each Bay
      • Control up to 2,048 Cameras and 512 Monitors in a Single Node or Expand Camera Capacity with a Multi-Node System (up to 24 Nodes)
      • Full System Reports From CM9700-MGR Provide System Wiring and Configuration Details
      • Sixteen RS-422 COM Ports (Expandable to 120) and Two RS-232 Full-Duplex Ports Available on the CPU
  15. Pelco CM9765-VCC 32 Input Video Camera Card
    Add to Compare
    Price: $671.62
    Add to Wishlist

      • Microprocessor-Based, Full Cross-Point Video Matrix
      • High-Density Architecture Supports up to 256 Cameras and 16 Monitors in Each Bay
      • Control up to 2,048 Cameras and 512 Monitors in a Single Node or Expand Camera Capacity with a Multi-Node System (up to 24 Nodes)
      • Full System Reports From CM9700-MGR Provide System Wiring and Configuration Details
      • Sixteen RS-422 COM Ports (Expandable to 120) and Two RS-232 Full-Duplex Ports Available on the CPU
  16. Pelco VS5104 4-Position Single Output Sequential Switcher (120VAC)
    Add to Compare
    Price: $263.11
    Add to Wishlist

      • Desktop Mountable
      • Switches 4 Cameras to 1 Monitor
      • Ideal for Use with Color / B&W Cameras
      • Coaxitron Compatible
      • For Looping or Terminating Operation
  17. Pelco VS5108 8-Input Sequential Desktop Switcher, 120VAC
    Add to Compare
    Price: $348.94
    Add to Wishlist

      • 120 VAC Input Only
      • 8 Inputs (Terminating or Looping)
      • Single Output
      • For Use w/ Color or Black-White Cameras
      • Capable of Operating on 12 VDC
  18. Pelco CM9700-SER Matrix SERCOM-8 Card CM9700
    Add to Compare
    Price: $750.12
    Add to Wishlist

      • Microprocessor-Based, Full Cross-Point Video Matrix
      • High-Density Architecture Supports up to 256 Cameras and 32 Monitors in Each Bay
      • Control up to 2,048 Cameras and 512 Monitors in a Single Node or Expand Camera Capacity with a Multi-Node System (up to 24 Nodes)
      • Full System Reports From CM9700-MGR Provide System Wiring and Configuration Details
      • Sixteen RS-422 COM Ports (Expandable to 120) and Two RS-232 full-Duplex Ports Available on the CPU
  19. Pelco CM9700-MPS Matrix Power Supply, Spare
    Add to Compare
    Price: $630.00
    Add to Wishlist

      • Microprocessor-Based, Full Cross-Point Video Matrix
      • High-Density Architecture Supports up to 256 Cameras and 32 Monitors in Each Bay
      • Control up to 2,048 Cameras and 512 Monitors in a Single Node or Expand Camera Capacity with a Multi-Node System (up to 24 Nodes)
      • Full System Reports From CM9700-MGR Provide System Wiring and Configuration Details
      • Sixteen RS-422 COM Ports (Expandable to 120) and Two RS-232 full-Duplex Ports Available on the CPU
  20. Pelco CM9700-CC1 CPU Controller For Large Matrix
    Add to Compare
    Price: $3,794.53
    Add to Wishlist

      • Microprocessor-Based, Full Cross-Point Video Matrix
      • High-Density Architecture Supports up to 256 Cameras and 32 Monitors in Each Bay
      • Control up to 2,048 Cameras and 512 Monitors in a Single Node or Expand Camera Capacity with a Multi-Node System (up to 24 Nodes)
      • Full System Reports From CM9700-MGR Provide System Wiring and Configuration Details
      • Sixteen RS-422 COM Ports (Expandable to 120) and Two RS-232 full-Duplex Ports Available on the CPU

See any errors on this page? Let us know.

Set Descending Direction

Items 1 - 20 of 26
  1. 1
  2. 2
checkprodttohere

Home page footer ads banner