Nitek Hewlett Packard Enterprise Kramer ACTi Fiber Optic Transmission
Hewlett Packard Enterprise is the global edge-to-cloud Platform-as-a-Service company that helps organizations accelerate outcomes by unlocking value from all of their data, everywhere. They're built on decades of reimagining the future through innovation.
-
HPE J9151E Aruba 10G SFP+ LC LR 10km SMF Transceiver
- SFP+ transceiver module
- 10 GigE
- 10GBase-LR
- LC single-mode
- Up to 6.2 miles
-
Kramer 613R-T-SET 3G SDI Transmitter/Receiver Extender Over Ultra-Reach SM Fiber
- Maximum Data Rate - 3Gbps
- HDTV Compatible
- Multi-Standard Operation - SDI (SMPTE 259M and SMPTE 344M), HD-SDI (SMPTE 292M), 3G HD-SDI (SMPTE 424M) & DVB-ASI
- Laser Standards Compliance - IEC 60825-1, FDA 21CFR1040; Laser Class 1: Safety of laser products
- Kramer Equalization & re-Klocking Technology - Rebuilds the digital signal to travel longer distances
-
Kramer AGM732F-1G-SFP 1G Ethernet Fiber Module, Up to 10km Distance for Managed Switches
- Gigabit Ethernet “short-reach” fiber connectivity
- LC duplex connector
- Fits into SFP interfaces of all Fully Managed Switches
- Fits into SFP interfaces of all Smart Switches
- Fits into SFP interfaces of JGS524F
-
Kramer 610R-US Detachable DVI Optical Receiver
- Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel)
- HDTV Compatible
- Not HDCP Compliant
- System Range - Up to 500m (1640ft)
- EDID Capture - Copies and stores the EDID from a display device (610T)
-
HPE JD095C FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
- SFP+ to SFP+
- 2 ft
- For HPE 5120
- 59XX
- 75XX; FlexFabric 1.92
-
Kramer 692 4K60 4:2:0 HDMI MM/SM Fiber Optic Receiver with USB, Ethernet, RS-232, IR & Stereo Audio De-embedding Over Ultra-Reach HDBaseT 2.0
- High Performance Standard Fiber Extender - HDBaseT 2.0 fiber receiver for providing ultra-reach signals over either multi-mode or single-mode optical fiber infrastructures, using Kramer pluggable OSP SFP+ units. 692 is a standard fiber extender that can be connected to any market-available HDBaseT-compliant extension product
- I-EDIDPro Kramer Intelligent EDID Processing - Intelligent EDID handling, processing and pass-through algorithm that ensures Plug and Play operation for HDMI source and display systems
- Ethernet Extension - Ethernet interface data flows in both directions allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control
- Bidirectional RS-232 Extension - Serial interface data flows in both directions allowing data transmission and device control
- Bidirectional Infrared Extension - IR interface data flows in both directions allowing remote control of peripheral devices located at either end of the extended line
-
Kramer 691 4K60 4:2:0 HDMI MM/SM Fiber Optic Transmitter with USB, Ethernet, RS-232, IR & Stereo Audio Embedding Over Ultra-Reach HDBaseT 2.0
- High Performance Standard Fiber Extender - HDBaseT 2.0 fiber transmitter for providing ultra-reach signals over either multi-mode or single-mode optical fiber infrastructures, using Kramer pluggable OSP SFP+ units. 691 is a standard fiber extender that can be connected to any market-available HDBaseT-compliant extension product
- I-EDIDPro Kramer Intelligent EDID Processing - Intelligent EDID handling, processing and pass-through algorithm that ensures Plug and Play operation for HDMI source and display systems
- Ethernet Extension - Ethernet interface data flows in both directions allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control
- Bidirectional RS-232 Extension - Serial interface data flows in both directions allowing data transmission and device control
- Bidirectional Infrared Extension - IR interface data flows in both directions allowing remote control of peripheral devices located at either end of the extended line
-
Kramer 616R-T-SET-US 2-Fiber Detachable Dual Link DVI Module (Rx & Tx Set)
- Max. Data Rate - 13.5Gbps (2.25Gbps per graphic channel)
- Max. Resolution - HDTV: 480p, 720p, 1080p; Vesa: VGA to WQUXGA @33Hz (XGA not supported)
- Not HDCP Compliant
- Standards Compliance - Supports DVI1.0, fully implemented by fiber-optic communication and DDC2B by virtual DDC; Class A digital device, pursuant to part 15 and 2 of FCC and CE
- Laser Standards Compliance - IEC 60825-1, FDA 21CFR1040; Laser Class 1: Safety of laser products
-
Kramer 612R-T-SET 4K60 4:4:4 DP Transmitter/Receiver Over Extended-Reach MM Fiber Optic
- Compliant with DisplayPort v1.2 specifications
- Max. Resolution — 4096x2160@60Hz
- Max. Data Rate — 21.6Gbps (5.4Gbps per lane)
- Supports Dual-mode DP (DP++)
- Max. Extension — 656ft (200m) over dual LC multi-mode OM3 fiber optic cable
