Nitek AG Neovo Yale AVE TRENDnet ZKAccess Fiber Optic Transmission
AG Neovo is a world-leader in display devices for both professional and consumer markets.. Designed for a wide range of conditions AG Neovo delivers products that blend in with their environment allowing their use in a wide range of locations. This intense focus on design has set their equipment apart from the competition and allowing their systems to perform where others would fail. Recently, two of AG Neovo's devices were recipients of the prestigious iF award for product design.
Founded in 1999, AG Neovo is headquartered in Taiwan and has offices throughout Europe, Asia and North America. Its success is based not only of their technology but their approach and by listening to the requirements and concerns of the industry AG Neovo is redefining the traditional monitor by delivering new and innovative products to the world stage.
For warranty information click here: http://us.agneovo.com/us/content/warranties.asp

-
TRENDnet TFC-1000S40D5 Intelligent 1000Base-T to 1000Base-LX Dual Wavelength Single Mode SC Fiber
- Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX standards
- 1 x 1000Base-T RJ-45 port
- 1 x 1000Base-LX single-mode bi-directional simplex-SC type fiber port
- Provides Dip switch to set: Fiber (Forced / Auto-Negotiation), LLR (Enable / Disable)
- Support LLCF (Link Loss Carry Forward, Link Pass Through)
-
TRENDnet TFC-1000S20 Intelligent 1000Base-T to 1000Base-LX Single-Mode SC Fiber Converter
- Compliant with IEEE 1000Base-T and 1000Base-LX
- One 1000Base-T RJ-45 port
- One 1000Base-LX Port w/ SC-Type Connector
- Status LED indicators for Power, Link/Activity, Full-Duplex, and Speed
- Wall-Mountable
-
TRENDnet TI-UF11SFP Industrial SFP to Gigabit UPoE Media Converter
- Hardened IP30 rated SFP to Gigabit UPoE converter
- SFP port accommodates Multi or Single Mode fiber
- Provides up to 60W for PoE, PoE+ and UPoE compliant devices
- Includes DIN-rail and wall mounts
- Wide operating temperature range -40 to 75 °C (-40 to 167 °F)
-
TRENDnet TI-PF11SFP Hardened Industrial SFP to Gigabit PoE+ Media Converter
- Hardened IP30 rated SFP to Gigabit PoE+ converter
- SFP port accommodates Multi or Single Mode fiber
- Up to 40 km fiber networking distances with the TI-MGBS40 SFP module
- Provides up to 30W for PoE and PoE+ compliant devices
- Includes DIN-rail and wall mounts
-
TRENDnet TI-F11SFP Hardened Industrial 100/1000Base-T to SFP Media Converter
- Hardened IP30 rated 100/1000 Base-T Ethernet to SFP converter
- SFP port accommodates Multi or Single Mode fiber
- Up to 80 km fiber networking distances with the TEG-MGBS80 SFP module
- Includes DIN-rail and wall mounts
- Extreme -40 to 75 ºC (-40 to 167 ºF) operating temperature range
-
TRENDnet TFC-110S60i Intelligent 10/100Base-TX to 100Base-FX Single Mode SC Fiber Converter
- Compliant with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX, 100Base-FX Standards
- Support LLCF (Link Loss Carry Forward, Link Pass Through)
- Support LLR (link Loss Return) for FX port
- Hot Pluggable & Wall-Mountable
- Optional 19” System Chassis (TFC-1600) holds up to 16 Media Converters
-
TRENDnet TEG-MGBS10-4 4-Pack SFP Single Mode LC Module, 10Km
- Includes four TEG-MGBS10 modules
- Compliant with IEEE 802.3z Gigabit Ethernet
- ANSI Fiber Channel compliant
- Small Form-Factor Pluggable (SFP) and Multi-Source Agreement (MSA) compliant
- Supports data rates of up to 1.25Gbps
-
TRENDnet TI-F10SC Hardened Industrial 100Base-FX Multi-Mode SC Fiber Converter
- Hardened IP40 rated compact housing
- 100Base-FX Multi-Mode fiber over distances of up to 2 km (1.2 mi.)
- SC-type fiber port
- Extreme -40 to 75 ºC (-40 to 167 ºF) operating temperature range
- Overload current protection
-
TRENDnet TFC-110S20D5i Intelligent 100Base-TX to 100Base-FX Dual Wavelength Single Mode SC Fiber Converter
- Must use with TFC-110S20D3i
- Compliant with IEEE 802.3u 100Base-TX and 100Base-FX standards
- 1 x 10/100Base-TX RJ-45 port
- 1 x 100Base-FX single-mode bi-directional simplex-SC type fiber port
- Port level SNMP management support