Pelco G1512-3PJV50AD ImagePak High Resolution WDR 5-50mm AI Mount

Pelco G1512-3PJV50AD ImagePak High Resolution WDR 5-50mm AI Mount G1512-3PJV50AD by Pelco
Pelco G1512-3PJV50AD ImagePak High Resolution WDR 5-50mm AI Mount G1512-3PJV50AD by Pelco
Model No
Product Highlights
    • Wide Dynamic Range
    • 650 TV Lines
    • High Sensitivity
    • Day/Night with Automatic or Manual Control
    • 1/3-Inch Format CCD Imager

The Pelco G1512-3PJV50AD ImagePak Camera consists of Pelco C20-DW-6 1/3 CCD high-resolution day & night WDR camera (650 TVL), 13VD5-50 10x varifocal lens, Eh2512-3 enclosure, and the EM1512 mount. The C20-DW-6 1/3 CCD High Resolution Day & Night WDR Camera (650 TVL) is Pelco’s fully featured analog day & night WDR (Wide Dynamic Range) CCD camera with a minimum illumination of 0.13 lux. The WDR technology provides a 120 dB dynamic range and produces superior images over a range of lighting conditions, including extreme backlight conditions. Its day & night technology provides high performance in low lighting conditions. The camera uses an ICR (Removable IR-Cut Filter) to switch between color and B&W (Black & White) modes as environmental lighting conditions change and as the need for IR sensitivity is realized.The C20-DW-6 camera features auto-sensing power (24 VAC or 12 VDC with AC line lock or internal synchronization) and AGC (Automatic Gain Control). It also includes AWB (Automatic White Balance) for difficult lighting situations, digital noise reduction, and BLC (Backlight Compensation) features that adjust the picture to prevent objects from appearing dark because of a strong backlight. This day & night camera also uses slow electronic shutter technology to improve the illumination performance for low-light environments. It has built-in analytical capabilities including privacy zones, motion detection, and camera titles that add to its functionality. These fine-tuning features can be easily set using the on-screen menus. The C20-DW-6 camera is quick and easy to install.

The C20-DW-6 camera has a standard CS lens mount and can be used with fixed, manual, or auto iris (DC drive) lenses. The iris is controlled through a standard 4-pin square connector that is included with all Pelco auto iris lenses. On-screen configurable menus can be accessed locally using the rear panel button or remotely using any Pelco controller (sold separately) with Pelco D or Coaxitron protocol. Use these menus to select a specific profile, to customize and save camera settings for the specific application, and trigger alarm out functions. This C20-DW-6 camera is equipped with configurable alarm in and out function for external devices such as IR lighting control, wiper operation, and local alerting upon alarm of an external device. It is ideal for critical security applications requiring analog images in all types of lighting and system configurations.The 13VD5-50 varifocal lens is versatile and flexible. This auto iris lens covers a focal length range of up to 5 to 50mm. You can adjust the lens to get the exact field of view instead of the almost-the-right-view. Appropriate for indoor and outdoor lighting situations, the 13VD5-50 lens will fit all 1/3 CS-mount cameras requiring DC-drive auto-iris lenses. This lens comes with an installed standard square 4- pin plug for easy installation and convenience.The 13VD5-50 intraspot-type lens optimizes the dynamic range of the iris. It features a maximum aperture of less than f1.8 to a minimum aperture of f360. The 13VD5-50 lens featues high performance characteristics across a wide range of lighting conditions.

Eh2512-3 is an indoor & outdoor camera enclosure constructed from die-cast aluminum. It has a compact body length of 13.38 / 339.85mm (base) and 14.39 / 365.51mm (overall). The tethered, removable lid provides easy access to the innovative camera sled. It features 2 adjustable glands (PG9 and PG11) at the bottom of the enclosure allow for easy installation of the power and video cables.


  • Wide Dynamic Range
  • 650 TV Lines
  • High Sensitivity
  • Day/Night with Automatic or Manual Control
  • 1/3-Inch Format CCD Imager
  • Digital Signal Processing
  • CS Lens Mount
  • Autosensing DC Drive Auto Iris
  • Automatic/Manual White Balance Settings for Difficult Lighting Situations
  • Selectable Automatic Gain Control
  • Advanced Backlight Compensation
  • Autosensing Power (24 VAC/12 VDC with Selectable
  • AC Line Lock/Internal Synchronization)
  • 3D Digital Noise Reduction (DNR)
  • Privacy Zones
  • Built-in Unshielded Twisted Pair (UTP) Output
  • Motion Detection
  • Camera Titles
  • Built-in Coaxitron®, RS-485 Pelco D Protocol
SKU  G1512-3PJV50AD
Features  Auto Gain Control, Automatic White Balance
Manufacturer  Pelco
NDAA Compliant
Camera Signal    Analog
Resolution   650 TVL
Sensor Option   1/3" CCD
Lens Type   Varifocal
Lens Size   5-50mm
Infrared Distance   Non Infrared
Durability   Indoor
Mount Type  Bracket Required
Voltage  12vDC, 24vAC
Electronic Shutter   Auto, 1/60 to 1/100,000 sec; Manual, 1/60 to 1/10,000 sec
Image Device   Sony 1/3-inch Super HAD CCD II 960H
Minimum Scene Illumination  0.13 lux
Operating Humidity   20% to 90%
Operating Temperature   –10° to 55°C (14° to 131°F)
Dimensions (W x H)  108 x 60 x 55 mm (4.25" L x 2.36" W x 2.17" H)
Power Consumption  4.5 W
Privacy Zone   Yes, 15 sizable windows
Protocols  Pelco D
S/N Ratio  48 dB (>52 dB by parameter adjustment)
Scanning System   525 lines, 2:1 interlace
Signal System   NTSC
Video Output   1 Vp-p, 75 ohms
Zoom Ratio   255X
Synchronization  AC line lock/Internal
Digital Noise Reduction   3D
Backlight Compensation   Yes
Automatic White Balance   ATW/push lock/manual/anti-CR/user2/user/push
Auto Gain Control   Off/on up to 36 dB, 16 levels configurable
Motion Detection   Yes, four areas sensitivity selectable
Automatic White Balance   Yes
Auto Gain Control   Yes
There are no related videos.
Downloads & Manuals
Availability: Out of stock