The NV-4PS10-PVD from NVT is a Power Supply Cable Integrator Hub that combines a 1 Amp/channel power supply with pass through video and telemetry data, for up to 4 cameras and all over UTP wire. The NV-4PS10-PVD is Designed for installation in the wiring/IDF telecom closet, or at the Control/MDF room, the NV-4PS10-PVD consolidates connectivity vial standard 4-pair RJ45 EIA/TIA 568B compliant premises wiring and pin outs. The NV-4PS10-PVD from NVT is PVD™ product used for making the camera, Power, Video and Data connections via an RJ45 connector and a single 4-pair cable. Control/MDF room connections are achieved with a single 4-pair RJ45 cable for each group of four cameras. P/T/Z telemetry data, if required, passes through the NV-4PS10-PVD’s data path and is connected to the controller via a second 4-pair RJ45 cable.
- Provides Class 2 SELV camera power and pass-through video and telemetry data connectivity for up to 4 cameras, each via a single RJ45 4-pair UTP cable
- Standard telecom/datacom structured cabling pinouts per EIA/TIA 568B
- Independently selectable 24 or 28VAC with 1 Amp max per channel
- Automatic-reset fault protection; transient protection
- Individually floating outputs ensure total ground-loop immunity
- Diagnostic LEDs show load/no load, miswires, and overload conditions
- Use with the NV-216A-PV or NV-218A-PVD transceivers or the NV-226J-PV transmitter at the camera
- Power cameras via UTP over significant distances (see Power Distance Calculator)
- 1.75” high x 7.25” deep x 9.25” wide, wall or desk mount
Found a lower price? Complete this simple form:
See any errors on this page? Let us know.