The AL1002ULADA from Altronix is an extremely cost effective 10 amp voltage regulated remote power supply/battery charger. It may be connected to any 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC such as strobes and horns) expansion support to meet ADA requirements.The AL1002ULADA comes with a NAC Power Extender. It also provides auxiliary power to support system accessories. The 10 amp rated supply current can be divided between the four (4) outputs for powering NAC devices. Each output is rated at 2.5 amp max., and can be independently programmed for Steady, Temporal Code 3 or Strobe Synchronization. All outputs may be programmed for Input to Output Follower Mode (output will follow input. i.e. March Time Input, March Time Output). The AL1002ULADA delivers regulated and filtered 24 volt power to Class B or Class A NAC loop circuits. The AL1002ULADA has a separate 1.0A auxiliary output with reset for four (4)-wire smoke detectors is available. An individual output of 4 amp is achieved by paralleling 2 outputs. In non-alarm condition independent loop supervision for Class A and/or Class B FACP NAC circuits is provided. In the event of a loop trouble the FACP will be notified via the steered input (input 1 or input 2). In addition, there are common trouble output terminals (NC, C, NO) which are used to indicate general loop/system trouble. A common trouble input is provided for optional NC (normally closed) devices to report trouble to the FACP. Two (2) FACP signaling outputs can be employed and directed to control supervision and power delivery to any combination of the four (4) outputs. The AL1002ULADA also features “Loop Output” trouble memory indication to help identify troublesome sporatic problems. Model is available in a larger enclosure AL1002ULADAJ.
- Ground fault detection
- Zero voltage drop upon transfer to battery backup
- AC input and DC output LED indicators
- AC fail supervision (form "C" contact rated @ 1 amp 28VDC)
- Temporal Code 3 Mode
- Horn/Strobe sync protocols include: Gentex, System Sensor, Faraday and Amseco
- 2-wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification appliances (strobes) continue to operates
Found a lower price? Complete this simple form:
See any errors on this page? Let us know.