pp

Welcome Guest

My Cart (0)
SHOP NEWREFURBISHED

Camera Brackets

Shop By

Currently Shopping by

  1. Manufacturer: Panavise Remove This Item
  2. Form: Box Remove This Item

Panavise

PanaVise is a major manufacturer of mobile electronics mounts for GPS units, satellite radio receivers, mobile video screens, CCTV camera mounts, mobile data terminals and circuit board holders. Their products are designed to last in the punishing environment of mobile electronics where large temperature fluctuations, vibrations and high levels of impact happen every day. In the security industry, PanaVise is a premier supplier of high quality CCTV camera mounts with a range that will suit every application and last in just about any environment.

Having been in the industry for over 50 years PanaVise know that it’s not just great products that matter its great service as well. When you contact them via phone or email you will always get a prompt efficient response to your enquiry and helpful suggestions as to the types of products that might suit your needs.

For warranty information click here: http://www.panavise.com/index.html?PageID=56&PageName=Warranty&sec_id=56&sec_status=[sec_status]class=


PanaVise Products, Inc.

Tel:(800) 759-7535
Fax: (800) 395-8002

Set Descending Direction

Items 1-20 of 21

per page
Page:
  1. 1
  2. 2
checkprodtFromhere
  1. Panavise 809 CCTV Camera Window Mount (up to 3 lbs.)

    Add to Compare
    Price: $16.81
    Add to Wishlist
       

    Panavise 809 CCTV Camera Window Mount (up to 3 lbs.)

      • Quickly move cameras from vehicle-to-vehicle or location-to-location
      • 1/4-20 stud with lockring
      • Powerful suction pad attaches to any smooth, flat, non-porous surface including windshields, windows and two-way mirrors
      • Full range of motion at the camera (knob adjustment): 210 degree Tilt, 360 degree Turn & 360 degree Rotation
      • Ratcheted arm has 140 degree vertical motion; knob locks arm into place
  2. Panavise 827-06 Deluxe Mount W/ Knob Adjustment

    Add to Compare
    Price: $23.27
    Add to Wishlist
       

    Panavise 827-06 Deluxe Mount W/ Knob Adjustment

      • Set Knob adjustment for a tamper resistant install. Wrench included
      • Available in 6" (152.4mm) (826-06) or 9" (228.6mm) (826-09) overall length
      • Available in Black or Cream, Add "W" to end of part number when ordering Cream
      • 6" (152.4mm) mounts pictured
  3. Panavise 827-06W CCTV Deluxe 6-inch Rise, Knob And Set Screw ADJ White

    Add to Compare
    Price: $24.62
    Add to Wishlist
       

    Panavise 827-06W CCTV Deluxe 6-inch Rise, Knob And Set Screw ADJ White

      • 6" (152.4mm) overall mount length
      • Both adjusting points have a full range of motion: 210° Tilt, 360° Turn & 360° Rotation
      • 1/4-20 mounting stud with lockring
      • Shafts are machined aluminum alloy 0.875" (22.2mm) in diameter
      • Knob and tamper-resistant set-screw
  4. Panavise 827-09 Deluxe Camera Mount, 9-inch (Black)

    Add to Compare
    Price: $21.95
    Add to Wishlist
       

    Panavise 827-09 Deluxe Camera Mount, 9-inch (Black)

      • 9" (228.6mm) overall mount length
      • Both adjusting points have a full range of motion: 210 degree Tilt, 360 degree Turn & 360 degree Rotation
      • 1/4-20 mounting stud with lockring
      • Shafts are machined aluminum alloy 0.875" (22.2mm) in diameter
      • Knob and tamper-resistant set-screw adjusting options included
  5. Panavise 845-246 Deluxe Micro Mount

    Add to Compare
    Price: $10.32
    Add to Wishlist
       

    Panavise 845-246 Deluxe Micro Mount

      • Modular system: Base, Shaft and Head screw together
      • Solid steel Shafts [0.5" (12.7mm) diameter] will make a 2" (50.8mm), 4" (101.6mm) or 6"
      • (152.4mm) long mount. 1/4-20 stud with lockring
      • Fully adjustable at the camera (190 degree Tilt, 360 degree Turn & 360 degree Rotation)
      • Knob and tamper-resistant set-screw adjusting options included. Matching vinyl cover adds a finished look
  6. Panavise 846-06 Standard Micro Mount (Black)

    Add to Compare
    Price: $16.20
    Add to Wishlist
       

    Panavise 846-06 Standard Micro Mount (Black)

      • 0.5" (12.7mm) diameter solid steel shaft
      • 1/4-20 mounting stud with lockring
      • Fully adjustable at the camera (190 degree Tilt, 360 degree Turn & 360 degree Rotation)
      • Knob and tamper-resistant set-screw adjusting options included
      • Matching vinyl cover adds a finished look!
  7. Panavise 847-1/2 Micro Mount for 1/2-inch Conduit (Silver only)

    Add to Compare
    Price: $19.24
    Add to Wishlist
       

    Panavise 847-1/2 Micro Mount for 1/2-inch Conduit (Silver only)

      • For smaller CCTV cameras weighing up to 3 lbs. (1.4kg)
      • For 1/2" (12.7mm) conduit or NPT pipe installs
      • Length from center of flange to center of shaft: 3.5" (88.9mm)
      • Overall mount length: 3.125" (79.4mm)
      • Adjusting point features 210? Tilt, 360 degree Turn & 360 degree Rotation
  8. 3/4" Micro Conduit Mount - Not Painted (PANA84734)

    Add to Compare

    Reg: $19.24

    Price: $10.34

    Add to Wishlist
       

    3/4" Micro Conduit Mount - Not Painted (PANA84734)

      • For smaller CCTV cameras weighing up to 3 lbs. (1.4kg)
      • For 1/2" (12.7mm) conduit or NPT pipe installs
      • Length from center of flange to center of shaft: 3.5" (88.9mm)
      • Overall mount length: 3.125" (79.4mm)
      • Adjusting point features 210? Tilt, 360 degree Turn & 360 degree Rotation
  9. Pass Thru Micro Mount - Black (PANA84806)

    Add to Compare

    Reg: $17.98

    Price: $11.68

    Add to Wishlist
       

    Pass Thru Micro Mount - Black (PANA84806)

      • Hollow aluminum shaft [0.5" (12.7mm) outside diameter; 0.375" (9.5mm) inside diameter] with slot for cable pass thru
      • Pass thru slot is 0.375" x 0.625" (9.5mm x 15.9mm)
      • 1/4-20 stud with lockring
      • Fully adjustable at the camera (190 degree Tilt, 360 degree Turn & 360 degree Rotation)
      • Knob and tamper-resistant set-screw adjusting options included
  10. Pass Thru Standard Mount - Black (PANA84906)

    Add to Compare

    Reg: $20.94

    Price: $12.13

    Add to Wishlist
       

    Pass Thru Standard Mount - Black (PANA84906)

      • 6" (152.4mm) overall length (from base to top of lockring)
      • Hollow aluminum shaft [1.0" (25.4mm) outside diameter; 0.875" (22.2mm) inside diameter] with hole for cable pass thru
      • Round pass thru hole is 0.625" (15.9mm) in diameter
      • 1/4-20 mounting stud with lockring
      • Fully adjustable at the camera: 210 degree Tilt, 360 degree Turn & 360 degree Rotation
  11. 1/2" Standard Conduit Mount - Not Painted (PANA85412)

    Add to Compare

    Reg: $21.99

    Price: $11.24

    Add to Wishlist
       

    1/2" Standard Conduit Mount - Not Painted (PANA85412)

      • For standard CCTV cameras weighing up to 5 lbs. (2.3kg)
      • For 1/2" (12.7mm) conduit or NPT pipe installs
      • Length from center of flange to center of shaft: 3.5" (88.9 mm)
      • Overall mount length: 3.125" (79.4mm)
      • Adjusting point features 210 degree Tilt, 360 degree Turn & 360 degree Rotation
  12. 3/4" Standard Conduit Mount - Not Painted (PANA85434)

    Add to Compare

    Reg: $21.26

    Price: $11.24

    Add to Wishlist
       

    3/4" Standard Conduit Mount - Not Painted (PANA85434)

      • For standard CCTV cameras weighing up to 5 lbs. (2.3kg)
      • For 3/4" (19.1mm) conduit or NPT pipe installs
      • Length from center of flange to center of shaft: 3.5" (88.9 mm)
      • Overall mount length: 3.125" (79.4mm)
      • Adjusting point features 210 degree Tilt, 360 degree Turn & 360 degree Rotation
  13. CCTV Dual Option - 3" Rise - Knob And Set Screw Adj. - Black (PANA88303)

    Add to Compare

    Reg: $20.16

    Price: $11.68

    Add to Wishlist
       

    CCTV Dual Option - 3" Rise - Knob And Set Screw Adj. - Black (PANA88303)

      • 3" (76.2mm) overall mount length
      • Includes two mounting bases that screw easily into the machined aluminum alloy shaft [0.875" (22.2mm) in diameter]
      • Use the Tri-Foot Base [4" (101.6mm) outside diameter with three 0.265" (6.7mm) holes on a 3.25" (82.5mm) bolt circle] for solid
      • surfaces, or the T-Bar Clip for drop ceiling rails
      • Full range of motion at the camera: 210 degree Tilt, 360 degree Turn & 360 degree Rotation
  14. CCTV Dual Option - 6" Rise - Knob And Set Screw Adj. - Black (PANA88306)

    Add to Compare

    Reg: $23.74

    Price: $12.58

    Add to Wishlist
       

    CCTV Dual Option - 6" Rise - Knob And Set Screw Adj. - Black (PANA88306)

      • 6" (152.4mm) overall mount length
      • Includes two mounting bases that screw easily into the machined aluminum alloy shaft [0.875" (22.2mm) in diameter]
      • Use the Tri-Foot Base [4" (101.6mm) outside diameter with three 0.265" (6.7mm) holes on a 3.25" (82.5mm) bolt circle] for solid
      • surfaces, or the T-Bar Clip for drop ceiling rails
      • Full range of motion at the camera: 210 degree Tilt, 360 degree Turn & 360 degree Rotation
  15. CCTV Dual Option - 9" Rise - Knob And Set Screw Adj. - Black (PANA88309)

    Add to Compare

    Reg: $29.46

    Price: $14.38

    Add to Wishlist
       

    CCTV Dual Option - 9" Rise - Knob And Set Screw Adj. - Black (PANA88309)

      • 9" (228.6mm) overall mount length
      • Includes two mounting bases that screw easily into the machined aluminum alloy shaft [0.875" (22.2mm) in diameter]
      • Use the Tri-Foot Base [4" (101.6mm) outside diameter with three 0.265" (6.7mm) holes on a 3.25" (82.5mm) bolt circle] for solid
      • surfaces, or the T-Bar Clip for drop ceiling rails
      • Full range of motion at the camera: 210 degree Tilt, 360 degree Turn & 360 degree Rotation
  16. CCTV Dual Option - Telescoping Shaft - Knob And Set Screw Adj. - Black (PANA883T)

    Add to Compare
  17. CCTV J-Box - Knob And Set Screw Adj. - White (PANA897W)

    Add to Compare

    Reg: $40.99

    Price: $20.67

    Add to Wishlist
       

    CCTV J-Box - Knob And Set Screw Adj. - White (PANA897W)

      • Steel shaft is 0.875" (22.2mm) in diameter (hollow for lighter weight)
      • 1/4-20 mounting stud with lockring
      • Fully adjustable at the camera (210° Tilt, 360° Turn & 360° Rotation)
      • Ball swivel is 6.25" (158.8mm) from wall
      • Height of adjusting point is 3.5" (89mm)
  18. Panavise 898-06 Pass Thru J-Box Micro Mount (Black)

    Add to Compare
    Price: $18.98
    Add to Wishlist
       

    Panavise 898-06 Pass Thru J-Box Micro Mount (Black)

      • Hollow aluminum shaft [0.5" (12.6mm) outside diameter; 0.375" (9.5mm) inside diameter] with slot for cable pass thru
      • Pass thru slot is 0.375" x 0.625" (9.5mm x 15.9mm)
      • 1/4-20 mounting stud with lockring
      • Fully adjustable at the camera (190 degree Tilt, 360 degree Turn & 360 degree Rotation)
      • Integral J-Box mounting plate
  19. Panavise 898-06W Pass Thru J-Box Micro Mount (Cream)

    Add to Compare
    Price: $15.59
    Add to Wishlist
       

    Panavise 898-06W Pass Thru J-Box Micro Mount (Cream)

      • Hollow aluminum shaft [0.5" (12.6mm) outside diameter; 0.375" (9.5mm) inside diameter] with slot for cable pass thru
      • Pass thru slot is 0.375" x 0.625" (9.5mm x 15.9mm)
      • 1/4-20 mounting stud with lockring
      • Fully adjustable at the camera (190 degree Tilt, 360 degree Turn & 360 degree Rotation)
      • Integral J-Box mounting plate
  20. Panavise 899-06 Pass Thru J-Box Standard Mount (Black)

    Add to Compare
    Price: $21.32
    Add to Wishlist
       

    Panavise 899-06 Pass Thru J-Box Standard Mount (Black)

      • Hollow aluminum shaft [1.0" (25.4mm) outside diameter; 0.875" (22.2mm) inside diameter] with slot for cable pass thru
      • Round pass thru hole is 0.625" (15.9mm) in diameter
      • 1/4-20 mounting stud with lockring
      • Fully adjustable at the camera (210 degree Tilt, 360 degree Turn & 360 degree Rotation)
      • Integral J-Box mounting plate

Set Descending Direction

Items 1-20 of 21

per page
Page:
  1. 1
  2. 2
checkprodttohere